Anschutz Model 1903 Target Rifle Manual.pdf

Loading ...
Global Do...
News & Politics
Bedienungsanleitung
Instruction Leaflet
KK-Matchgewehre
Small Bore Target Rifles
Mod. 1903 / 1903 D · 1903 L / 1903 LD
Bitte sorgfältig lesen, bevor Sie
dieses Gewehr zusammenbauen
oder benutzen.
Please read carefully before you
assemble or operate this rifle.
04/02
Originalschussbild Ihres Gewehres 10 Schuss auf 50 m
Original group of your rifle 10 shots at 50 m
Fabr.-Nr.:
Serial No.:..........................................................................
Bitte hier eintragen · Please fill in here
J.G. ANSCHÜTZ GmbH & Co. KG
Jagd- und Sportwaffenfabrik
Daimlerstrasse 12
D-89079 Ulm / GERMANY
Postfach 11 28
D-89001 Ulm / GERMANY
Telefon (++49)-(0)-731-4012-0
Telefax (++49)-(0)-731-4012-700
anschuetz-sport.com
JGA-Info@anschuetz-sport.com
DGG · 04/02/2.500
3
2
Index
Preface .......................................................... p.15
Safety instructions ........................................ p.15
General handling of rifles ........................... p.16
Ear and eye protection ................................ p.17
Laws .............................................................. p.17
Product relating safety instructions ............. p.17
Liability .......................................................... p.18
Technical data .............................................. p.18
Assembly, fitting the ANSCHÜTZ barreled action ... p.18
Cocking, loading and safety operation ..... p.19
Unloading ..................................................... p.19
Trigger ........................................................... p.20
Order-numbers ............................................. p.23
Adjustment of the putt plate ........................ p.24
Cleaning, maintenance, care, lubrication .. p.24
Accessories ................................................... p.25
Warranty ....................................................... p.26
Copyright ...................................................... p.26
Drawings / Spare parts .............................. p.28
Warranty card .............................................. p.39
15
14
Preface
Dear Friends of ANSCHÜTZ,
You have made a good choice, now that
you have decided to buy an ANSCHÜTZ
product. The many great results obtained
with ANSCHÜTZ rifles by target shooters,
participants in the Olympic Games as well
as in World and European championships
made your choice easy, as your rifle has
benefited from our great experience of
making fine sporting and target rifles since
1856. World-wide, ANSCHÜTZ rifles are
respected because of their fine accuracy,
impeccable design and immaculate
workmanship. Should you still be unaware,
they include:
Air rifles, repeater summer biathlon air rifles,
small bore biathlon rifles, Flobert rifles, small
bore single loaders and repeaters, hunting
rifles and shotguns in diverse calibers, the
famous ANSCHÜTZ small bore target rifles
and air rifles and silhouette pistols and
silhouette rifles.
Safety instructions
      Attention:
Please read carefully the following articles
before using this rifle. It is extremely
important that you become thoroughly
familiar with this rifle and its operating
characteristics by carefully reading and
understanding the instructions in this booklet
before you attempt any use of it with
ammunition. Always remember the
sequence of disassembly. Should you still
have problems with the safe usage and
correct handling of your rifle or should you
have additional questions, please do not
hesitate to contact a competent gunsmith
or dealer or address our factory directly.
This instruction leaflet is extraordinarily
important. Make sure that it is always with
the rifle especially when it is sold, lent or
otherwise given to a third person. Our
products are exclusively meant for target
shooting. Their use is subject to the „Gene-
ral Technical Rules“ for all target shooting
disciplines of the INTERNATIONAL
SHOOTING SPORT FEDERATION (ISSF),
Bavariaring 21, 80336 München,
Germany or to the rules of the INTERNA-
TIONAL BIATHLON UNION, Airport-
center, Postbox 1, A-5073 Wals-Himmel-
reich, Austria. Additional copies of this
booklet can be ordered.
      Warning:
This rifle can be dangerous if it is not used
correctly or if this instruction leaflet is not
observed. The privilege of ownership and
safe use of your rifle carries a personal
responsibility that no one should take lightly.
Rifle accidents would not occur if the
following rules of shooting safety were
observed.
17
16
General handling of rifles
1. Treat every rifle as though it was loaded.
Do not take anyone’s word or automatically
assume it is not loaded. Check your rifle
personally each time you handle it. The safe
and courteous way to carry a rifle when
you are with others is to leave the bolt open
so that they can easily see that the rifle
cannot be fired. Make sure that the rifle is
not loaded when you stop shooting. Make
sure your rifle is unloaded before every
transport. Never pick up your rifle with your
finger on the trigger or the trigger guard.
2. Whenever you pick up your rifle, point
the muzzle at the ground. Always point the
muzzle of the barrel in a safe direction.
Never pull a rifle towards you by the
muzzle.
3. Only use your rifle in approved shooting
ranges. Shoot your rifle only under good
visibility and daylight conditions. If you use
your rifle in an indoors range, make sure it
is adequately ventilated. Make sure  that
there is a safe bullet trap which can be seen
from all sides and that there is no one in
the vicinity of your target. Be absolutely sure
of a safe backstop and target. Never fire
at a hard, smooth surface or water. Never
shoot at a skyline target or into the air. Do
not shoot at anything from which a bullet
may ricochet. Never fire your rifle with the
muzzle in the water or against any other
material to avoid an accident or damage
of your rifle.
4. Be sure that you use the correct am-
munition.  The correct calibre can be seen
on your rifle. Load your rifle only when you
are at the range and ready to shoot.
5. Always keep your rifle clean. Be sure
the bore is not obstructed by pellets or
bullets, dirt, water, grease or any other
foreign materials.
6. Place the safety fully into  „S“ or „F“
position - never inbetween. Always keep
safety in full „safe“ position until ready to
fire. Do not put your finger on the trigger
when operating the safety or whenever you
are not ready to shoot.
7. When not in use your rifle should be
stored in a locked and secure place
accessible only to you. Check first to make
sure it is unloaded. Store the rifle with
uncocked trigger. Store ammunition in a
separate and secure place. It is your special
responsibility to make sure that at all times
and especially when you are not present
your rifle is well secured, out of any reach
of children and other unauthorised persons
and in no way accessible to them. For the
safe storage of your rifle even in a locked
cabinet or safe the use of an additional
trigger lock is recommended.
Only give your rifle to authorised persons.
Never let your rifle be used by anyone who
is not familiar with the safe handling of a
rifle and these instructions. This rifle must
only by used by a responsible adult or
under his or her supervision.
8. Watch for any change in the operation
of your rifle which might impair its safety. If
you suspect or note a defect or malfunction,
stop using it immediately, unload the rifle,
make sure that it is not under pressure and
send it to a competent gunsmith, the factory
or its recommended repair station for
inspection. Note: Apart from normal
cleaning the rifle must only be disassembled
by an authorized gunsmith. Unqualified
handling or disassembly can cause injuries
or irreparable damage of the rifle.
9. Your rifle should always be handled with
extreme care. Make sure that it is never
dropped or placed in such a way that it
can fall. For transport purposes your rifle
should be dry and clean. We recommend
an approved protective gun case.
10. You must be in good physical condition
and mental health and not under the
influence of any substance (drugs, alcohol)
which might impair vision, dexterity or
judgement. Do not use your rifle when you
are tired. Tiredness may result in a loss of
control.
11. Clean your hands carefully after
shooting and cleaning your ANSCHÜTZ
product. Residues of bullets, powder or oil
might impair the health of your skin.
12. Your ANSCHÜTZ rifle has been
carefully built and inspected by skilled
technicians to provide maximum efficiency.
The service life depends on the owner’s
care and on cleaning following the owner’s
manual closely.
Ear and eye protection
You and other persons should always use
approved hearing protection and approved
shatterproof eye protection while shooting.
Laws
When using a rifle observe the corres-
Product relating safety
instructions
Important note for the handling
of rifles:
1. Unload your rifle immediately if you do
not intend to continue shooting. Remove the
bolt or leave it open at least. In the case of
a repeater remove the magazine as well.
Make sure there is no cartridge left in the
chamber.
2. Make sure there is nobody in the area
of case ejection.
3. If you store the rifle remove the bolt and
store the bolt uncocked in a separate place.
Important note for the handling
of ammunition:
1. Exclusively use clean, factory loaded and
new ammunition in the caliber approved
for your rifle.
2. Be aware that the range of a bullet
starting from cal. .22 l.r.  might be 1.6 km
or even longer. Therefore also be sure of
the safety of the impact area.
ponding regulations and laws for the use
of firearms in your country.
19
18
Liability
1. ANSCHÜTZ does not assume any
responsibility or payment of damage claims
for damages of any kind resulting from the
disregard of these instructions, non-qualified
treatment or repair, the use of non-original
ANSCHÜTZ spare par ts, incorrect
handling, negligence, removal of the knot
varnish or unauthorized modifications.
2. The stock of this rifle has been very
carefully checked by factory inspectors
prior to shipment and has been determined
to be free of defects. Certain kinds of abuse,
such as dropping of the rifle can cause
damage to the stock for which the owner is
solely responsible. We also assume no
responsibility for defects resulting from
inappropriate transportation (mail, plane,
etc.). Please immediately contact your
transporter in such a case.
3. Changes or alterations to this rifle or any
of its parts are prohibited. Such changes
or alterations can significantly impair the
safe use of our product and can lead to
accidents involving severe or even fatal
bodily injuries. Any product warranty will
automatically lapse in case changes or
alterations are implemented. Users are
requested to carefully inspect the product
with regard to possible changes and
alterations before use. In case of doubt you
should contact us for further information.
Small bore target rifles
Mod. 1903 · 1903 D
Technical Data:
Caliber:
.22 l.r.
Barrel length:
65 cm/25.5“
Rifling:
65 cm/25.5“
Total length:
110 cm/43.3“
Total lengthSystem: 76 cm/29.9“
Weight approx.:
4,6 kg/10.1 lbs
Version:
Single loader
Assembly, fitting the
ANSCHÜTZ barreled action
The stock, the barreled action and the bolt
are packed separately for shipment and
need to be assembled. However, do not
do this until you have followed all the
procedures listed below.
•Wipe away excess oil from the barreled
action and the bolt.
•Cock the bolt by turning the guide bolt
and the bolt handle opposite to each
other.
•Insert the bolt by actuated trigger.
•Insert the barreled action into the barrel
channel in the stock and press both parts
together.
•Screw in bedding screws with enclosed
Allen wrench Model No. 4406 (Order
No. 710.6301). First slightly tighten all
screws. Then tighten the front screws and
subsequently the rear screws (in the
direction of the muzzle). For correct ad-
justments we recommend our torque
wrench model No. 4405 (Order No.
700.6180), which is to be adjusted to
5 Nm (= 50 cmkp) for wood stocks.
•Pull a cleaning patch through the barrel
from the chamber towards the muzzle
several times.
After assembly for the first time large
settlements of the stock wood may occur.
Consequently we suggest that you tighten
the screws once more in the manner
described after some time. Check the the
screws before every shooting.
Cocking, loading and safety
operation
•Degrease the bolt and the interior of the
barrel without leaving lint.
•Open the bolt and pull it back to the stop.
Carefully insert an approved cartridge
with the bullet forward with the thumb into
the chamber. Make sure that the bullet is
not damaged.
•Now push the bolt forward to close the
breech and ensure that the bolt handle is
pushed completely downwards to lock it.
The bolt is now locked and cocked.
•After firing, lift the bolt handle and pull
the bolt fully to the rear.  This will cock
the bolt again and eject the empty case.
The safety is located on the left-hand side
of the receiver. It can be operated in
cocked position.
The rifle is:
•safe, when the „S“ (safe) is visible but the
„F“ (fire) is covered
•ready for shooting when the „F“ (fire) is
visible but the „S“ (safe) is covered.
Unloading
For safety reasons the rifle must immediately
be unloaded if you intend to stop shooting.
Unlock and open the bolt. This will eject
the cartridge. Please also see safety
instructions for the handling of rifles and
pistols.
21
20
Trigger
      Warning:
Your ANSCHÜTZ target rifle offers you a
versatility of individual adjusting properties.
Please make sure that your rifle always is
unloaded when carrying out adjustments.
1. Trigger weight
Adjust the trigger weight with set screw
No. 2:
•if you turn it to the right:
trigger weight is increased (+)
•if you turn it to the left:
trigger weight is decreased (-)
Trigger weight and first stage weight
depend on each other with regard to the
mechanic mechanism. If one of them is
changed there will always be a corres-
ponding change of the other as well.
2. Sear engagement
The sear engagement is the distance
between the second stage and the release
of the trigger.
Important note:
To protect your precise trigger and to
guarantee perfect operation you should
always close the action carefully. If the sear
engagement of single stage triggers is too
small and the trigger weight is too low or if
the first stage of two-stage triggers is too
short, the trigger might release inadvertently
by a sudden impact or too powerful closing
of the action if the gun is loaded and not in
the ”safe“ position.
Adjustment of the sear engagement for
assembled two-stage triggers with set screw
No. 1:
•if you turn it to the left:
sear engagement is shortened
•if you turn it to the right:
sear engagement is extended
Adjustment of an optimum sear engage-
ment:
Make sure your rifle is not loaded. Cock
your rifle and release the trigger. Check if
the trigger releases as desired.
The sear engagement is too long:
There is a small distance between the
second stage and the release of the trigger.
•Turn set screw No. 1 counter-clockwise
after cocking and releasing (approxi-
mately 1/8 turn each).
•Repeat this process until you do not feel
the second stage anymore. Then turn
1/4 turn back to the right. Thus the opti-
mum sear engagement is adjusted.
The sear engagement is too short:
There is no second stage. The trigger
releases un-defined without second stage.
•Turn set screw No. 1 clockwise  for at least
1/4 turn after cocking. Then release the
trigger and check if there is a second
stage. If not, repeat this procedure until
you feel a second stage.
•As soon as you feel a second stage
proceed according to the points of the
paragraph „The sear engagement is too
long“ to obtain an optimum sear enga-
gement.
Adjustment of the optimum sear enga-
gement for assembled single stage triggers
with set screw No. 1:
•Cock the rifle.
•Turn set screw No. 1 (first stage) as long
to the right until the trigger releases.
•Turn set screw No. 1 from this position
approx. 1/4 turn to the left.
      Warning:
Single stage triggers are very sensitive and
must be operated with special care.
The sear engagement of 5/100 mm is ob-
tained af ter the action is closed. In
combination with a minimum trigger weight
there might be a malfunction and an
increased risk (independent shot release).
3. Malfunctions of the trigger due to
wrong adjustment procedure
If the trigger is not adjusted correctly
malfunctions may occur, tampering with the
trigger adjustments will not result in any
success. Therefore proceed as follows:
After every change the function of the
trigger must be checked. When the
malfunction is removed check the desired
trigger values and adjust them again if
necessary.
The trigger catches the cocking piston or
firing pin, but the trigger does not release:
•Make sure that the safety of the trigger is
released.
The trigger does not catch the cocking
piston or firing pin:
•The first stage trigger is adjusted too
tightly.
•Turn set screw No. 1 approx. 1-2 turns to
the left. Procede according to par. 2.
4. Safety
There is a safety lever at the right side of
the trigger. Please see chapter „Cocking,
loading and safety operation“.
5. Maintenance
Please see chapter „Cleaning, mainte-
nance, care, oils“.
r e
t
23
22
Important note:
To protect your highly accurate trigger and
to maintain perfect functioning always close
the bolt carefully.
      Attention:
If you change the trigger remove the bolt
from the receiver when fitting the trigger as
otherwise the trigger will be damaged.
Adjustment of the trigger blade:
After loosening clamping screw No. 3 the
trigger blade can be moved in longitudinal
direction.
r e
t
When you order trigger parts
please indicate the order
number, type of rifle model
together with the trigger model
number. For left hand versions
please add ”L”
For small boremodelsproduction yearsFor small boremodels serial-no.starting from1607, 1613, 1608 EDS
Order No.Two-stagetriggerSingle-stagetriggerAdjusted toRight handversionLeft handversionFor models1407, 1407 Z, 1409, 1411
1413, 1408 EDS
1959 - 1974
1807, 1907, 1807 Z, 1907 Z
1907 Silh., 1807 Rep.
1907 Rep., 1907 Rep., 1912
1813, 1913, 1808 EDS
1808 D-RT, 1827, 1827F, 2007
2007/660, 2012, 2013
2013/690, 2013 Benchrest
54.18 MSR, 1808 MSR
2002 Compressed Air,
2020, 2025
143655
to
182155
starting
from
182156
1903, 1416 MSP, 1403 Rep.
64 MSR
2001 Superair
2001 D-RT Superair
2002 Superair
2002 D-RT Superair
700.6540
1407-U9
●
  150 g
●
700.6541
1408-U1
●
  500 g
●
700.6542
1408 D-U1
●
500 g
●
700.6543
1411-U2
●
1500 g
●
700.6550
5071/1
●
  100 g
●
700.6560
5071/1 D
●
100 g
●
700.6570
5075/1
●
  550 g
●
700.6580
5075/1 D
●
  550 g
●
700.6600
5018
●
100 g
●
700.6610
5018 L
●
  100 g
●
700.6620
5018 D
●
  150 g
●
700.6630
5018 L D
●
  150 g
●
700.6640
5020
●
  550 g
●
700.6650
5020 L
●
  550 g
●
700.6660
5020 D
●
  550 g
●
700.6670
5020 L D
●
  550 g
●
700.6740
5022
●
1500 g
●
700.6800
5098
●
  280 g
●
700.6810
5098 L
●
  280 g
●
700.6860
5100 D
●
  500 g
●
700.6870
5100 L D
●
  500 g
●
700.6875
5103
●
  1500 g
●
700.6700
5019
●
  100 g
●
700.6710
5021 D
●
  550 g
●
700.6720
5021
●
  100 g
●
800.0000
5024
●
  1500 g
●
700.6730
5023 D
●
  550 g
●
700.6660
5020 D
●
  550 g
●
700.6881
5197
●
550 g
●
Model1974-1979
starting
from 1979
L
= Left hand version
D
= Single-stage trigger
D-RT
= Running target
EDS
= Running target
Rep.
= Repeater
Silh.
= Silhouette
F
= Fortner
Z
= ”Zimmerstutzen”
MSP
= Silhouette pistol
MSR
= Silhouette rifle
2002 D-RT Compr.Air, 1827, 1827F
2027 Summer biathlon
25
24
Adjustment of the butt plate
The butt plate is screwed to the butt by two
interchangeable wedge-shaped spacers.
By adding, removing or reversing individual
spacers the angle and/or the height of the
butt plate can be modified and adapted to
individual requirements.
To remove a spacer:
•Loosen the screws of the butt plate but do
not screw it out completely.
•Pull upwards the end of the spacer in
which no opening is visible (for example
with a thin screw diver).
•Now turn the spacer in the same direction
around the free end  and remove it.
When inserting a spacer please proceed
vice versa.
Cleaning, Maintenance, Care,
Lubrication
Even af ter considerable use, your
ANSCHÜTZ small bore match rifle will not
require much attention - a tribute to its solid
design, first class materials, well proven
ANSCHÜTZ workmanship and precision.
If you follow the recommendations below,
you will help maintain the excellent
performance of your rifle for a long time.
Regular care after every shooting:
•Please only use resin and acid free oils.
•Use cleaning rod guide No. 4401
(Order No. 710.6340) to remove any
residues from the barrel to avoid that dirt
or oil particles will penetrate the trigger
mechanism. Clean with a lint-free cloth  or
pull cleaning cords several times through
the barrel from chamber to muzzle to
remove deposits. Subsequently pull a
slightly oiled, lint-free cloth or cleaning
cords through the barrel to avoid corrosion.
•Clean the bolt with a slightly oiled cloth.
•Make sure that the metal parts of your
rifle are protected against corrosion by a
slight oil film.
•Remove the oil film with a dry cloth or
cleaning cords before you shoot again.
Careful cleaning:
New rifles up to 10,000 shots in 1,000 shot
intervals, subsequently in 5,000 shot
intervals at least.
•Use oil to clean the barrel and push a
brass brush from the chamber to the
muzzle. Never move the brush back and
forth in the barrel. Only clean in shooting
direction. Remove the brush outside of the
muzzle and carefully pull the rod back
through the barrel.
•Then pull cleaning cords in dry condition
through the barrel until the last one shows
no considerable dirt.
•Before shooting the next time fire 5 shots
to get back to the former shooting per-
formance.
•Clean external parts with a slightly oiled
cloth.
Maintenance of the trigger:
•Lubricate the bearings slightly with cold
resistant molybdenum disulphide grease
once a year.
•Spot a small amount of oil into the bear-
ing parts using a needle.
•The internal parts should not be washed
with spray or oil to avoid resin or other
residues in the trigger.
      Attention:
When cleaning the rifle no dirt, residues of
solvents, grease or non-suitable oils must get
into the trigger mechanism. We therefore
recommend either to use our cleaning rod
guide or to clean your gun in a way that it
is horizontal or even with the stock up to
avoid any contamination of the trigger
mechanism.
Protect your rifle against dust, sand,
humidity, heat and other harmful influences.
Vacuum clean your gun case or soft gun
case once a month to remove dust and lint.
Gun cases and soft gun cases should have
a smooth and dust rejecting inner lining. Be
aware that condensed water might occur
as a result of temperature variations. In such
a case it has to be removed at once.  Leave
your gun case or soft gun case open when
you store them at home so that possible
humidity can escape. Adding a humidity
absorber reduces the development of
humidity. Be aware of other possible
changes or damage. In such a case take
your  rifle to an authorized gunsmith for
checking or send it to our factory.
To reduce the risk of damage in transit, we
recommend the disassembly of the barreled
action from the stock.
Accessories
Please ask for our catalogue.
27
26
Warranty
A warranty of 2 years will be issued. Parts
which are subjected to wear are not part
of this warranty. In the case of warranty we
substitute the defective parts free of charge.
Cases of warranty will only be accepted if
the article in question and the corres-
ponding purchase receipt plus filled-in
warranty card are presented. Warranty will
not be accepted if changes or repair works
have been carried out by persons who are
not authorised, if the rifle is not used
correctly or if non-ANSCHÜTZ original
parts were used.
We wish you much pleasure and success
with your ANSCHÜTZ product and would
be pleased if you could let us have your
ideas on our products and the design of
this instruction leaflet.
Copyright
Product specifications, design and model
changes are subject to change without prior
notice. Dimensions and colors are subject
to change. With reservation of misprints and
errors. Goods are subject to prior sale.
Delivery subject to the presentation of the
referring license for the purchase of
firearms.
ANSCHÜTZ, the ANSCHÜTZ logo and the
ANSCHÜTZ logo in connection with the
slogan „Die Meister Macher“ (also in
modified spelling) are protected brands of
J.G. ANSCHÜTZ GmbH & Co. KG, Ulm,
Germany. The unauthorized use of this
brand name is not allowed and punishable.
All rights of this instruction leaflet reserved.
The use of the instruction leaflet, also in
excerpts, is not allowed without the
permission of J.G. ANSCHÜTZ GmbH &
Co. KG and otherwise is punishable. This
is especially applicable for unauthorized
copying, translations and read-ins in elec-
tronic systems.
39
38
Notizen / Notes
<<<<GARANTIE>>>>Dieser Artikel wurde zum Verkauf freigegeben, nachdem erselbst, seine Materialien und Einzelteile strenge Konrollendurchlaufen haben, oder das Gewehr beim Beschuss seineHaltbarkeit und Funktion unter Beweis gestellt hat. Wir über-nehmen für zwei Jahre volle Garantie auf Material- oderBearbeitungsfehler (ausgenommen Schaft- und Federbrüche),sofern ein Mangel nachweisbar bereits im Zeitpunkt derÜbergabe des Artikels vorlag. Für Mängel, die auf unsach-gemäße Behandlung oder auf Reparaturen zurückzuführensind, stehen wir nicht ein. Die Garantieleistung steht in unse-rer Wahl in Nachbesserung oder Neulieferung. Schadens-ersatzansprüche – aus welchem Rechtsgrund auch immergeltend gemacht – sind ausgeschlossen. Wir bitten, dieseKarte – von Ihrem Waffenfachgeschäft ausgefüllt und unter-schrieben – mit dem Artikel an uns einzusenden.J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und SportwaffenfarbrikPostfach 1128 · D-89001 Ulm/Germany · www.anschuetz-sport.comFABRIKATIONS-NR.:
Serial-No. / Numéro de série:
DATUM DES VERKAUFS:
Date / Date d‘achat:
GEKAUFT BEI:
This item was bought from / Détaillant:
Stempel und Unterschrift des Fachhändlers
stamp of dealer / timbre du détaillant
✄
41
40
Notizen / Notes
<<<<GARANTIE>>>>Cet article n‘a été mis en vente qu‘après une vérificationminutieuse des pièces et matières à tous les stades de lafabrication ou après avoir subi un contrôle de fiabilité etde bon fonctionnement au banc d‘épreuve. Nous la garan-tissons pendant deux ans contre tout défaut de matière ouvice de fabrication (sauf contre les bris de crosse ou deressorts) dans la mesure ou il peut être prouvé qu‘un défautéxistait déjà au moment de l‘achat de l‘article. Nous nerépondons pas des défauts résultant d‘une utilisationincorrecte ou de réparations. Nous nous réservons d‘exé-cuter la garantie soit par remise en état soit par échange.Les demandes en dommages-intérêts sont irrecevables quel-le que soit la cause mise en avant. Veuillez faire rempliret signer cette carte par votre armurier et nous l‘adresseravec l‘article.J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und SportwaffenfarbrikPostfach 1128 · D-89001 Ulm/Germany · www.anschuetz-sport.com<<<<WARRANTY>>>>After throrough testing of materials and finished parts thisitem has passed a rigid final inspection as well as prooftesting or test shooting. If, despite these precautions, thereis any failure due to defective materials or workmanship(except brocken stocks and springs) within two years thenecessary repairs will be carried out without charge, in sofar as the item was evidently defective at the time ofpurchase. No claims under warranty can be accepted ifthe item has been subjected to improper use or unauthorizedrepair. The item will be either repaired or replaced at ourdiscretion. Claims for compensation – put forward for anylegal cause whatsoever – are excluded. This warranty card– completed and stamped by your dealer – must bereturned with the item for repairs.J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und SportwaffenfarbrikPostfach 1128 · D-89001 Ulm/Germany · www.anschuetz-sport.com✄
Bedienungsanleitung
Instruction Leaflet
KK-Matchgewehre
Small Bore Target Rifles
Mod. 1903 / 1903 D · 1903 L / 1903 LD
Bitte sorgfältig lesen, bevor Sie
dieses Gewehr zusammenbauen
oder benutzen.
Please read carefully before you
assemble or operate this rifle.
04/02
Originalschussbild Ihres Gewehres 10 Schuss auf 50 m
Original group of your rifle 10 shots at 50 m
Fabr.-Nr.:
Serial No.:..........................................................................
Bitte hier eintragen · Please fill in here
J.G. ANSCHÜTZ GmbH & Co. KG
Jagd- und Sportwaffenfabrik
Daimlerstrasse 12
D-89079 Ulm / GERMANY
Postfach 11 28
D-89001 Ulm / GERMANY
Telefon (++49)-(0)-731-4012-0
Telefax (++49)-(0)-731-4012-700
anschuetz-sport.com
JGA-Info@anschuetz-sport.com
DGG · 04/02/2.500