ENGINEERING SPECIFICATION
PULTRUDED DYNARAIL®
FIBERGLASS LADDER & LADDER CAGES
March 14, 2005
2
Revision 2
SECTION 06610
FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS
PULTRUDED SQUARE TUBE LADDER & LADDER CAGES
PART 1 - GENERAL
1.1 SCOPE OF WORK
A. This specification is for a pultruded fiberglass ladder system in compliance with OSHA
1910.27.
1.2 REFERENCES
A. The publications listed below (latest revision applicable) form a part of this specification
to the extent referenced herein. The publications are referred to within the text by the
designation only.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) Test
Methods:
ASTM D-638-Tensile Properties of Plastics
ASTM D-790-Flexural Properties of Unreinforced and Reinforced Plastics
ASTM D-2344-Apparent Interlaminar Shear Strength of Parallel Fiber Composites by
Short Beam Method
ASTM D-495-High Voltage, Low-Current, Dry Arc Resistance of Solid Electrical
Insulation
ASTM D-696-Coefficient of Linear Thermal Expansion for Plastics
ASTM E-84-Surface Burning Characteristics of Building Materials
THE OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)
Federal Register, Volume 39, No. 125, Section 1910.27
1.3 CONTRACTOR SUBMITTALS
A. The CONTRACTOR shall furnish shop drawings of all fabricated ladder, cages and
accessories in accordance with the provisions of this Section.
March 14, 2005
3
Revision 2
B. The CONTRACTOR shall furnish manufacturer's shop drawings clearly showing
material sizes, types, styles, part or catalog numbers, complete details for the
fabrication of and erection of components including, but not limited to, location,
lengths, type and sizes of fasteners, clip angles, member sizes, and connection details.
C. The CONTRACTOR shall submit the manufacturer’s published literature including
structur