EE0-425-Q_A-Demo-Troytec.pdf

About Global Documents

Global Documents provides you with documents from around the globe on a variety of topics for your enjoyment.
Global Documents utilizes edocr for all its document needs due to edocr's wonderful content features. Thousands of professionals and businesses around the globe publish marketing, sales, operations, customer service and financial documents making it easier for prospects and customers to find content.
class http www testkiller http www troytec traffic Packetshaper IP address
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Demo Edition
 
 
 
 
 
 
 
© 2007- 2008 Test Killer, LTD All Rights Reserved 
 
 
 
 
Packereer Packetshaper 6 Certification Exam
 
Exam: EE0-425 
EE0-425
1
http://www.testkiller.com
http://www.troytec.com
QUESTION: 1
A custom traffic class has been created for a device on the network. The Inbound/Test class has
been created with a criteria for the IP address of 10.1.1.3. This device uses HTTP, SMTP, and
POP3. This device needs a different set of rules than the other devices on the network. The
following traffic tree shows the placement of the class in the tree. How do you make sure an
HTTP flow to 10.1.1.3 is being classified in the Inbound/Test class?
A.   set class to Exception
B.   set class to Inheritable
C.   turn on Top Talkers/Listeners
D.   turn on traffic discovery within class
Answer: A
QUESTION: 2
You want to create a Citrix class that will match traffic by client name and an HTTP class that will
match traffic by user-agent and URL. Which command set can you use to determine what you
should specify in your matching rules?
A.   traffic flow
B.   traffic history
C.   class criteria
D.   class capture-ids
Answer: C
QUESTION: 3
Which statement about hostlists is true?
EE0-425
2
http://www.testkiller.com
http://www.troytec.com
A.   You can re-use the same hostlist for multiple classes.
B.   You cannot have DNS names and IP addresses in the same list.
C.   You can copy a hostlist created under /Inbound to /Outbound to reuse it.
D.   You cannot add DNS names to a list if you have not set the DNS server in Setup.
Answer: A
QUESTION: 4
A PacketShaper is located at a branch office with a 256 Kbps WAN connection to the corporate
office. The administrator wants to classify traffic based on a series of port numbers (6005 through
6007) that the application server at the corporate office listens on. When creating the class, which
two matching rule scenarios classify this traffic? (Choose two.)
A.   single matching rule with value of 6005-6007 listed in the Inside Port(s) field
B.   single matching rule with value of 6005-6007 listed in the Outside Port(s) field
C.   single matching rule with value of 6005, 6006, 6007 listed in the Inside Port(s) field
D.   three multiple matching rules with value of 6005, 6006, 6007 (separately for each of the three)
listed in the Outside Port(s) field
Answer: B, D
QUESTION: 5
Which method allows you to have a class that will capture just Citrix-ICA print traffic?
A.   creating a Citrix class with criterion option set to "Printer" and the value of the criterion field
set to the name of your printer
B.   creating a Citrix class with criterion option set to "Priority" and the value of the criterion field
set to the value of the priority tag in your print traffic
C.   creating a Citrix class with criterion option set to "Client Name" and the value of the criterion
field set to the name of the host requesting the print job
D.   creating a Citrix class with criterion option set to "Published Application" and the value of
the criterion field set to the name of the application issuing the print job
Answer: B
EE0-425
3
http://www.testkiller.com
http://www.troytec.com
QUESTION: 6
A PacketShaper is located at a branch office with a 256 Kbps WAN connection to the corporate
office. A dedicated application server (IP address 192.168.10.10) resides at the corporate office
and communicates via Port 1007 on the client side. Which two matching rules would classify this
traffic? (Choose two.)
A.   single matching rule with value of 1007 listed in the Inside Port(s) field
B.   single matching rule with value of 192.168.10.10 listed in the Outside Name field
C.   single matching rule with value of 192.168.10.10 listed in the Inside Address field
D.   single matching rule with value of 192.168.10.10 listed in the Outside Address field
Answer: A, D
QUESTION: 7
Which three functions are allowed by PacketShaper's command scheduling feature? (Choose
three.)
A.   back up measurement data to an FTP server nightly
B.   download configuration changes from PolicyCenter hourly
C.   disable Instant Messaging applications during classroom lecture times
D.   increase priority for a specific class during the first week of every month
Answer: A, C, D
QUESTION: 8
Why would you configure the Failover feature in Setup?
A.   to detect if a Frame Relay PVC has failed and to adjust the link speed as appropriate
B.   to detect if a site router's primary link has failed and to adjust  the link speed as appropriate
C.   to detect if a site router has failed and to configure a new site router IP address and link speed
D.   to detect if a WAN router has become unavailable and to adjust the total link speed as
appropriate
Answer: B
QUESTION: 9
EE0-425
4
http://www.testkiller.com
http://www.troytec.com
Click the Exhibit button. Which PacketShaper feature can be enabled to ensure that an Ethernet
switch that forms the Branch Office LAN is able to detect if the router fails?
A.   Failover
B.   Bypass mode
C.   Link-State Mirroring
D.   Bridge Passthrough
Answer: C
QUESTION: 10
After changing the IP addressing within your network, you cannot access a PacketShaper from
telnet or through the web interface. You connect to the PacketShaper using HyperTerminal.
Which two commands will correct the IP address? (Choose two.)
A.   ip address
B.   setup guide
C.   setup address
D.   setup ipaddress
Answer: B, D
QUESTION: 11
Which two features are compatible with Direct Standby? (Choose two.)
A.   user events
B.   ATM support
EE0-425
5
http://www.testkiller.com
http://www.troytec.com
C.   compression
D.   traffic shaping
Answer: A, D
QUESTION: 12
Click the Task button. Match the correct cable to each connection type.
Answer:
EE0-425
6
http://www.testkiller.com
http://www.troytec.com
QUESTION: 13
You have just received a new PacketShaper to manage your private WAN and need to configure
it. The PacketShaper has already been physically installed in the rack and connected inline
between your local LAN switch and your WAN router. In addition to the WAN router, you also
have an Internet router that will serve as your default gateway.Your laptop is also connected to the
LAN switch. You open a browser and try to connect to http://unconfigured.packetshaper.com in
order to go through PacketShaper Guided Setup, but you cannot connect. What is the reason for
this?
A. 
 
 You are 
trying 
to connect 
to 
the wrong URL. The correct URL is
http://unconfigured.packeteer.com.
B.   You forgot to include the proper port number in the URL. The URL should be
http://unconfigured.packetshaper.com:2000.
C.   The PacketShaper must be inline between your laptop and the Internet in order for you to be
able to connect to it using http://unconfigured.packetshaper.com.
D.   You must run Guided Setup before deploying. You will not be able to connect to it using a
browser until you remove it from the network and use the console cable and a terminal
application to complete initial setup.
Answer: C
QUESTION: 14
EE0-425
7
http://www.testkiller.com
http://www.troytec.com
You want to enable secure web access to the PacketShaper from the WAN using port 443 only.
How would you disable standard web access using port 80?
A.   disable HTTP access in the Security Setup Page
B.   generate a new certificate in the HTTPS Setup Page
C.   select the "force secure login" option in the Security Setup Page
D.   create a class under Localhost defined by port 80, add a discard policy to that class, turn
shaping on
Answer: D
QUESTION: 15
You want to view the port number used by a traffic class. Which two commands can you use to
view the ports used within the traffic class?  (Choose two.)
A.   port show
B.   traffic flow
C.   traffic history
D.   class show (class name)
Answer: B, C
QUESTION: 16
Which CLI command would you use to identify the traffic class(es) and service type(s) currently
being used by a user with an IP address of 10.1.1.5?
A.   class show 10.1.1.5
B.   hostdb show 10.1.1.5
C.   traffic active 10.1.1.5
D.   traffic flow -tupCA 10.1.1.5
Answer: D
QUESTION: 17
What are three correct statements about default gateway and site router? (Choose three)
EE0-425
8
http://www.testkiller.com
http://www.troytec.com
A.   Default gateway setting in the PacketShaper is used to route all the LAN traffic through that
address.
B.   Default gateway setting in the PacketShaper is used only for the communication to and from
the PacketShaper.
C.   Site router has to be in the same subnet as the PacketShaper IP address.
D.   If site router is set to an IP address, PacketShaper monitors and manages only the traffic
flowing through the site router.
E.   If site router is set to an IP address, PacketShaper monitors all the traffic flowing through the
PacketShaper but manages only the traffic flowing through the site router.
Answer: B, C, D
QUESTION: 18
Which three functions can PacketShaper perform while Shaping is off? (Choose three.)
A.   enable compression
B.   enforce only the default policies
C.   monitor and report bandwidth usage by different classes
D.   Auto Discover new services (traffic classes) in the class tree
Answer: A, C, D
QUESTION: 19
Click the Task button. PacketShaper is controlling traffic on a 10 Mbps link. The following
policies and partitions are applied.
Inbound   uncommitted - none
!Localhost                                         Pri(6)
  JDEdwards                                      Rate(3)15K
  DNS                                                 Pri(6)
  HTTP                                               Rate(4)0
  Default                                            Pri(3)
Place the traffic classes in the order they will receive bandwidth.
EE0-425
9
http://www.testkiller.com
http://www.troytec.com
Answer:
EE0-425
10
http://www.testkiller.com
http://www.troytec.com
QUESTION: 20
What are two Ignore Policy characteristics? (Choose two.)
A.   The CLI must be used to review RTM.
B.   It exempts a class from bandwidth allocation.
C.   Only class and policy hits are recorded on the monitor page.
D.   Traffic will be ignored but still counted as part of the link traffic under management.
Answer: B, C
EE0-425
11
http://www.testkiller.com
http://www.troytec.com