Loading ...
Global Do...
News & Politics
6
0
Try Now
Log In
Pricing
Keeper® II Lithium Thionyl Chloride (LiSOCl2) MSDS EaglePicher provides an outstanding line of Lithium Thionyl Chloride cells and batteries, which are capable of providing power to a wide variety of applications. The exceptional reliability of the original Keeper® II cell is a result of the unique electrochemistry of the system, along with a design concept that requires military ruggedness. Keeper® II batteries provide reliable performance under several environmental conditions. Click on Part Number to view data sheet. Keeper® II Prismatic Cells and Batteries (LiSOCl2) Voltage (V) Capacity (mAh) Length (in) Width (in) Thickness (in) Weight (g) Part Number 3.5 350 0.60 0.65 0.25 4.0 LTC-3PN 3.5 350 0.65 0.25 0.60 4.0 LTC-3PN-S2 3.5 350 0.60 0.25 0.65 4.0 LTC-3PN-S4 3.5 750 1.20 0.70 0.35 9.0 LTC-7P 3.5 750 1.00 0.65 0.25 6.8 LTC-7PN 3.5 750 0.65 0.25 1.00 6.8 LTC-7PN-S4 3.5 750 1.00 0.25 0.65 6.8 LTC-7PN-S6 3.5 1500 1.50 1.20 0.35 19.0 LTC-7PMP 3.5 1500 1.54 1.22 0.45 25.0 LTC-7PMP-F-S2 7.0 750 1.50 1.20 0.35 19.0 LTC-7PMS 3.5 1200 1.00 0.54 0.54 11.4 LTC-12P 3.5 1600 1.44 0.55 0.55 16.0 LTC-16P 3.5 1600 1.86 0.66 0.66 25.0 LTC-16P-CO-F-S11 3.6 1500 1.20 0.90 0.28 14.0 LTC-15M-S3 3.6 1600 1.71 0.99 0.37 20.0 LTC-16M 3.6 1600 1.50 0.90 0.28 16.0 LTC-16M-S1 7.0 1600 1.92 1.03 0.68 45.0 LTC-16M-MS-S2 3.5 1600 1.90 0.70 0.72 30.0 LTC-16P-CO-F-S6 3.5 1600 1.90 0.70 0.72 30.0 LTC-16P-CO-F-S8 6.8 1600 1.90 1.30 0.70 53.0 LTC-16P-MS-F-S9 3.5 1600 1.90 1.30 0.70 53.0 LTC-16P-MP-F-S1 EaglePicher Technologies, LLC Commercial Power P.O. Box 47 Joplin, MO 64802 (417) 623-8000 inquiry.keeper@eaglepicher.com OSHA PEL ACGIH TLV % (optional) 1/0 ppm 5/0 ppm LEL UEL OSHA's Hazard Communication Standard. U.S. Department of Labor Occupational Safety and Health Administration (Non-Mandatory Form) Material Safety Data Sheet May be used to comply with Section I Eagle-Picher Technologies, LLC 417-776-2256 800-424-9300 (CHEMTREC) 29 CFR 1910.1200 Standard must be KEEPER II/Lithium/Thionyl Chloride Battery no information is available, the space must be marked to indicate that Identity (As Used on Label and List) Note: Blank spaces are not permitted. If any item is not applicable, or Form Approved consulted for specific requirements. OMB No. 1218-0072 14212 Bethel Road Date Prepared Manufacturer's Name 1-Jul-98 Seneca, MO 64865 P.O. Box 130 Address (Number, Street, City State, and Zip Code) Telephone Number for Information 417-776-2256 Emergency Telephone Number Signature of Preparer (optional) Section II - Hazardous Ingredients/Identity Information Other Limits Recommended Hazardous Components (Specific Chemical Identity, Common Name(s)) Lithium metal Cas #7439-93-2 Boiling Point Section III - Physical/Chemical Characteristics N/A Specific Gravity (H2O=1) Melting Point N/A N/A N/A Vapor Pressure (mm Hg.) N/A Solubility in Water N/A Appearance in Odor Vapor Density (Air=1) Evaporation Rate (Butyl Acetate=1) N/A N/A Section IV - Fire and Explosion Hazard Data Flash Point (Method Used) N/A Flammable Limits Extinguishing Media Do not use water. Use dry chemical, soda ash, sand. Special Fire Fighting Procedures Use self contained breathing apparatus and full protective equipment. Unusual Fire and Explosion Hazards Do not recharge, disassemble, heat above 125°C (257°F), incinerate or expose contents to water. Vent, rupture or explosion may result and cause severe burns. (Reproduce Locally) OSHA 174, Sept. 1985 N/A-reactive alkali metal Thionyl chloride (SOC12) Cas #007719-09-7 XX XX Hazardous Decomposition or Byproducts Incompatibility (Materials to Avoid) SOC12 Water, humid air, alkalies, and temperature above 140°C (284°F) Conditions to Avoid: Vent rupture or explosion will release thionyl chloride Stability Unstable Stable Section V - Reactivity Data Section VI - Health Hazard Data Ingestion? SOC12 In presence of water or humid air, hydrochloric acid & sulfur oxide. Hazardous Polymerization May Occur Will Not Occur Conditions to Avoid Yes Health Hazards (Acute and Chronic) Eyes Yes Skin? Yes Routes(s) of Entry Inhalation? SOC12 - Will burn and irritate eyes & skin. Upper respiratory irritant. Continuous inhalation of fumes may cause lung damage. Carcinogenicity NTP? IARC Monographs? OSHA Regulated? Medical Conditions Generally Aggravated by Exposure N/A Signs and Symptoms of Exposure SOC12 - Eye and skin irritation, pungent odor and respiratory irritation. N/A If free(S0C12) is present, evacuate areas and provide ventilation, wash exposed area with soda ash or sodium bicarbonate solution. Seek medical attention. Emergency and First Aid Procedures Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled short circuit of terminals, an accumulation of shorted batteries, which may cause dangerous elevated temperatures Avoid contact if vent rupture or explosion has occurred. Other wise protect from heat, Dispose of waste according to federal EPA, state and local regulations. Waste Disposal Method Precautions to be taken in Handling and Storing Recommended Neoprene Do not short circuit, heat above 125°C (257°F), recharge, disassemble, incinerate or expose to water. Other Precautions Section VIII - Control Measures Respiratory Protection (Specific Type) Self-contained breathing apparatus Ventilation N/A Work/Hygienic Practices Other Protective Clothing or Equipment N/A Local Exhaust Specific Protective Gloves Eye Protection Mechanical (General) Other N/A LTC-3PN Product Features • Manufactured in the USA. • Low profile, prismatic design. • Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. • Years of low rate continuous use. • Stand-by use with 80% capacity retention after 15 years at room temperature. • Highly efficient utilization of valuable board space. • Wave solderable (limit solder bath exposure to a maximum of 5 seconds). • High energy density compared to other chemistries. • No charging circuits required. • Higher cell voltage allows for fewer cells and high reliability. • Flat discharge characteristics provide optimum voltage regulation. • Non-pressurized system allow for high temperature usage. • Ship unrestricted. • Underwriters Laboratories recognized component. LTC-3PN Lithium-Thionyl Chloride Batteries The LTC-3PN series is a perfect match for applications which have little space but need a reliable, high energy source. This cell is available in three (3) printed circuit board (PCB) mounting configurations, with the flexibility to be designed for any mounting geometry. With 350 mAh packed into 0.0975 in2, these small power sources will provide the solution for your electronic packaging requirements. Do you have questions concerning: • What size battery you need? • What is passivation and its effects? • What is the maximum rate of this cell? • Any other technical question? If so, call our Engineers at (417) 659-9635 for detailed technical information. TYPICAL LTC-3PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES DISCHARGE TIME (HOURS) 1 mA 10 uA 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 2 4 6 8 x 10 8 x 100 2 4 6 x 1,000 2 4 6 8 x 10,000 4 2 6 8 HIGH TEMPERATURE OPERATION AT 75°C TEMPERATURE OPERATION AT 20°C COLD TEMPERATURE OPERATION AT -20°C x 1,000 LTC-3PN Lithium-Thionyl Chloride Batteries Lithium-Thionyl Chloride Batteries P.O. BOX 47 • JOPLIN, MO 64802 (417) 659-9635 • FAX (417) 626-2078 e-mail: inquiry.keeper@eaglepicher.com • Web Site: www.eaglepicher.com WE CAN DESIGN TO FIT ANY APPLICATION. Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. DISTRIBUTED LOCALLY BY: Specifications LTC-3PN Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .......................... 350 mAH Volume .................................................................... 0.103 cu. in. Weight .......................................................................... 4.6 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) Terminal and Support Pins are .030" dia. (solder tinned) .175 .65 .60 .70 .17 .30 .40 .265 .30 POWER LEADS - Specifications LTC-3PN-S2 Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .......................... 350 mAH Volume .................................................................... 0.103 cu. in. Weight .......................................................................... 4.6 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) Terminal and Support Pins are .030" dia. (solder tinned) .265 .60 .65 .30 .17 .48 POWER LEADS + Specifications LTC-3PN-S4 Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .......................... 350 mAH Volume .................................................................... 0.103 cu. in. Weight .......................................................................... 4.6 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) Terminal and Support Pins are .030" dia. (solder tinned) +.65 .60 .175 .265 .70 -POWER LEADS .25 The specifications on this sheet may be changed by Eagle-Picher Technologies, LLC, without notice. Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-3PN 3.5 350 0.60 0.65 0.265 4.0 LTC-3PN-S2 3.5 350 0.65 0.265 0.60 4.0 LTC-3PN-S4 3.5 350 0.60 0.265 0.65 4.0 * LTC-3PN-SM-S1 3.5 350 0.60 0.65 0.265 4.0 * Surface Mount (Reflow soldering not acceptable) LTC-7P Lithium-Thionyl Chloride Batteries The LTC-7 module series was developed for those applications that require a high quality, ruggedly constructed, low profile battery configuration. Two (2) cell module designs are available, as either series connected (LTC-7PMS, 7.0 volts, 750 mAh) or parallel connected (LTC-7PMP, 3.5 volts, 1500 mAh) batteries. Additional features such as reverse charge protection can also be built in for added safety in sensitive applications. TYPICAL LTC-7P DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES DISCHARGE TIME (HOURS) 1 mA 10 uA 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 2 4 6 8 x 10 8 x 100 2 4 6 x 1,000 2 4 6 8 x 10,000 4 2 6 8 HIGH TEMPERATURE OPERATION AT 75°C TEMPERATURE OPERATION AT 20°C COLD TEMPERATURE OPERATION AT -20°C LTC-7P Product Features • Manufactured in the USA. • Low profile, prismatic design. • Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. • Years of low rate continuous use. • Stand-by use with 80% capacity retention after 15 years at room temperature. • Highly efficient utilization of valuable board space. • Wave solderable (limit solder bath exposure to a maximum of 5 seconds). • High energy density compared to other chemistries. • No charging circuits required. • Higher cell voltage allows for fewer cells and high reliability. • Flat discharge characteristics provide optimum voltage regulation. • Non-pressurized system allow for high temperature usage. • Ship unrestricted. • Underwriters Laboratories recognized component. Do you have questions concerning: • What size battery you need? • What is passivation and its effects? • What is the maximum rate of this cell? • Any other technical question? If so, call our Engineers at (417) 659-9635 for detailed technical information. LTC-7P Lithium-Thionyl Chloride Batteries Lithium-Thionyl Chloride Batteries P.O. BOX 47 • JOPLIN, MO 64802 (417) 659-9635 • FAX (417) 626-2078 e-mail: inquiry.keeper@eaglepicher.com • Web Site: www.eaglepicher.com WE CAN DESIGN TO FIT ANY APPLICATION. Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. DISTRIBUTED LOCALLY BY: Specifications LTC-7PMP-F-S2 Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C ........................ 1500 mAH Volume ...................................................................... .796 cu. in. Weight ........................................................................ 23.6 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: Ryton™ module Terminal and Support Pins are .030" dia. (solder tinned) 1.53 1.21 .025 STAND OFFS (4 Pls.) 1.14 .45 .14 .27 1.10 POWER LEADS - + + - Specifications LTC-7PMP Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C ........................ 1500 mAH Volume ...................................................................... .594 cu. in. Weight ........................................................................ 20.0 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: Ryton™ module Terminal and Support Pins are .030" dia. (solder tinned) 0.33 POWER LEADS 1.20 STAND OFF (4 PLS.) 1.50 1.100.22 0.90 1.00 0.25 0.30 0.025 - + MIN. SUPPORT PINS MAY NOT BE ELECTRICALLY ISOLATED FROM THE NEGATIVE CASE. (2 PLS.) MAY OR Specifications LTC-7PMS Nominal Open Circuit Voltage, 25°C .............................. 7.3 volts Nominal Working Voltage, 25°C...................................... 7.0 volts Nominal Capacity (350 hr. rate), 25°C .......................... 750 mAH Volume ...................................................................... .594 cu. in. Weight ........................................................................ 19.0 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: Ryton™ module Terminal and Support Pins are .030" dia. (solder tinned) 0.33 POWER LEADS 1.20 SUPPORT PINS MAY NOT BE ELECTRICALLY ISOLATED FROM THE NEGATIVE CASE. (2 PLS.) MAY OR STAND OFF (4 PLS.) 1.50 1.100.22 0.90 1.00 0.25 0.30 0.025 - + MIN. The specifications on this sheet may be changed by Eagle-Picher Technologies, LLC, without notice. Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-7P 3.5 750 1.20 0.70 0.33 9.0 * LTC-7PMP-F-S2 3.5 1500 1.54 1.22 0.45 25.0 LTC-7PMP 3.5 1500 1.50 1.20 0.35 19.0 LTC-7PMS 7.0 750 1.50 1.20 0.35 19.0 * Battery contains diode and resistor protection (IN5817 diode, 1.6k resistor). Working voltage rate dependent. LTC-7PN Lithium-Thionyl Chloride Batteries The LTC-7PN series was design specifically to be printed circuit board (PCB) compatible. With a low profile, prismatic shape, this battery is unique in the industry and a perfect match for space saving requirements. Available in 3 PCB mounting configurations, these cells provide high quality, high energy density, non-position sensitive solutions to your high density electronics power needs. TYPICAL LTC-7PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES DISCHARGE TIME (HOURS) 1 mA 10 uA 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 2 4 6 8 x 10 8 x 100 2 4 6 x 1,000 2 4 6 8 x 10,000 4 2 6 8 HIGH TEMPERATURE OPERATION AT 75°C TEMPERATURE OPERATION AT 20°C COLD TEMPERATURE OPERATION AT -20°C LTC-7PN Product Features • Manufactured in the USA. • Low profile, prismatic design. • Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. • Years of low rate continuous use. • Stand-by use with 80% capacity retention after 15 years at room temperature. • Highly efficient utilization of valuable board space. • Wave solderable (limit solder bath exposure to a maximum of 5 seconds). • High energy density compared to other chemistries. • No charging circuits required. • Higher cell voltage allows for fewer cells and high reliability. • Flat discharge characteristics provide optimum voltage regulation. • Non-pressurized system allow for high temperature usage. • Ship unrestricted. • Underwriters Laboratories recognized component. Do you have questions concerning: • What size battery you need? • What is passivation and its effects? • What is the maximum rate of this cell? • Any other technical question? If so, call our Engineers at (417) 659-9635 for detailed technical information. LTC-7PN Lithium-Thionyl Chloride Batteries Lithium-Thionyl Chloride Batteries P.O. BOX 47 • JOPLIN, MO 64802 (417) 659-9635 • FAX (417) 626-2078 e-mail: inquiry.keeper@eaglepicher.com • Web Site: www.eaglepicher.com WE CAN DESIGN TO FIT ANY APPLICATION. Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. DISTRIBUTED LOCALLY BY: Specifications LTC-7PN Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .......................... 750 mAH Volume ............ .1625 cu. in. Weight .................... 6.8 GMS Operating Temperature ........ ............-40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) Terminal and Support Pins are .030" dia. (solder tinned) 0.40 0.30 POWER LEADS 1.00 1.10 0.30 0.175 0.175 0.650 0.250 + Specifications LTC-7PN-S4 Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .......................... 750 mAH Volume ............ .1625 cu. in. Weight .................... 6.8 GMS Operating Temperature ........ ............-40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) Terminal and Support Pins are .030" dia. (solder tinned) .650 .250 + 1.00 .30 .48 .17 .050 .200 Specifications LTC-7PN-S6 Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C ............................750 mAH Volume .................................................................... .1625 cu. in. Weight .......................................................................... 6.8 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case positive polarity) Terminal and Support Pins are .030" dia. (solder tinned) .650 .17 .250 .25 + 1.00 1.10 SUPPORT PIN The specifications on this sheet may be changed by Eagle-Picher Technologies, LLC, without notice. Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-7PN 3.5 750 1.00 0.65 0.25 6.8 LTC-7PN-S2 3.5 750 1.00 0.65 0.25 6.8 LTC-7PN-S4 3.5 750 0.65 0.25 1.00 6.8 * LTC-7PN-S5 3.5 750 1.00 0.65 0.25 7.1 LTC-7PN-S6 3.5 750 1.00 0.25 0.65 6.8 ** LTC-7PN-SM-S1 3.5 750 1.00 0.65 0.25 6.8 * Supplied with Molex connector ** Surface Mount (Reflow soldering not acceptable) LTC-12P & 16P Lithium-Thionyl Chloride Batteries Eagle Picher's TIMEKEEPER™ computer memory backup batteries and square prismatic batteries are designed to give long life to low current drain applications. A UL recognized component, these designs will meet and exceed the requirements of the memory backup industry. With added features available such as reverse current protection and Molex connectors, our long shelf life batteries will provide the power you need. TYPICAL LTC-16P DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES DISCHARGE TIME (HOURS) 1 mA 10 uA 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 2 4 6 8 x 10 8 x 100 2 4 6 x 1,000 2 4 6 8 x 10,000 4 2 6 8 HIGH TEMPERATURE OPERATION AT 75°C TEMPERATURE OPERATION AT 20°C COLD TEMPERATURE OPERATION AT -20°C LTC-12P & 16P Product Features • Manufactured in the USA. • Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. • Years of low rate continuous use. • Stand-by use with 80% capacity retention after 15 years at room temperature. • Wave solderable (limit solder bath exposure to a maximum of 5 seconds). • High energy density compared to other chemistries. • No charging circuits required. • Higher cell voltage allows for fewer cells and high reliability. • Flat discharge characteristics provide optimum voltage regulation. • Non-pressurized system allow for high temperature usage. • Ship unrestricted. • Underwriters Laboratories recognized component. Do you have questions concerning: • What size battery you need? • What is passivation and its effects? • What is the maximum rate of this cell? • Any other technical question? If so, call our Engineers at (417) 659-9635 for detailed technical information. LTC-12P & 16P Lithium-Thionyl Chloride Batteries Lithium-Thionyl Chloride Batteries P.O. BOX 47 • JOPLIN, MO 64802 (417) 659-9635 • FAX (417) 626-2078 e-mail: inquiry.keeper@eaglepicher.com • Web Site: www.eaglepicher.com Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-12P 3.5 1200 1.00 0.54 0.54 11.4 * LTC-12P-S3 3.5 1200 1.00 0.54 0.54 12.0 LTC-16P 3.5 1600 1.45 0.54 0.54 16.2 LTC-16P-CO-F-S11 3.5 1600 1.84 0.64 0.68 24.0 LTC-16P-MP-F-S1 3.5 3200 1.90 1.27 0.70 52.0 * LTC-16P-MS-F-S9 7.0 1600 1.90 1.27 0.66 42.0 * Supplied with Molex connector WE CAN DESIGN TO FIT ANY APPLICATION. Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. DISTRIBUTED LOCALLY BY: Specifications LTC-12P Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C ..........................1200 mAH Volume .................................... .293 cu. in. Weight ........................................11.4 GMS Operating Temperature...... -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case positive polarity) Power Contacts: Button is negative Case is positive 0.15 DIA. 1.00 0.54 0.54 + - Specifications LTC-16P Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C ........................ 1600 mAH Volume .................................... .427 cu. in. Weight ........................................ 16.2 GMS Operating Temperature...... -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case positive polarity) Power Contacts: Button is negative Case is positive 0.15 DIA. + - 1.45 0.54 0.54 Specifications LTC-16P-CO-F-S11 Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.6 volts Nominal Capacity (350 hr. rate), 25°C ..........................1600 mAH Volume ...................................................................... .810 cu. in. Weight ........................................................................ 24.0 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: Polyethylene Terminal and Support Pins are .030" dia. (solder tinned) 0.025 STAND OFFS (4 PLS) 1.84 1.70 0.64 0.68 0.020 SQ. PIN (2 PLS.) 0.100 MIN 0.060 x .040 HIGH POLARITY KEY INDICATES POSITIVE END OF BATTERY + - The specifications on this sheet may be changed by Eagle-Picher Technologies, LLC, without notice. LTC-15M & 16M Lithium-Thionyl Chloride Batteries The powerful KEEPER II Magnum series includes the LTC-16M and LTC-15M series cells. These cells provide years of low-power drain, stand-by use or those demanding industrial, commercial and military applications where reliability is the primary concern. The low profile prismatic designs of the 15M and 16M cells, allow maximum board space utilization and are available with polarized PCB mount pins. Also available are battery configurations offering either high voltage (7.0 volts) or high capacity (3200 mAh) output. With these characteristics the KEEPER II Magnum series exhibits the same high quality performance that the entire KEEPER II line has demonstrated for over 20 years. TYPICAL LTC-16M DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES DISCHARGE TIME (HOURS) 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 2 4 6 8 x 10 8 x 100 2 4 6 x 1,000 2 4 6 8 x 10,000 4 2 6 8 HIGH TEMPERATURE OPERATION AT 75°C TEMPERATURE OPERATION AT 20°C COLD TEMPERATURE OPERATION AT -20°C 1 mA 10 uA LTC-15M & 16M Product Features • Manufactured in the USA. • Low profile, prismatic design. • Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. • Years of low rate continuous use. • Stand-by use with 80% capacity retention after 15 years at room temperature. • Highly efficient utilization of valuable board space. • Wave solderable (limit solder bath exposure to a maximum of 5 seconds). • High energy density compared to other chemistries. • No charging circuits required. • Higher cell voltage allows for fewer cells and high reliability. • Flat discharge characteristics provide optimum voltage regulation. • Non-pressurized system allow for high temperature usage. • Ship unrestricted. • Underwriters Laboratories recognized component. Do you have questions concerning: • What size battery you need? • What is passivation and its effects? • What is the maximum rate of this cell? • Any other technical question? If so, call our Engineers at (417) 659-9635 for detailed technical information. LTC-15M & 16M Lithium-Thionyl Chloride Batteries Lithium-Thionyl Chloride Batteries P.O. BOX 47 • JOPLIN, MO 64802 (417) 659-9635 • FAX (417) 626-2078 e-mail: inquiry.keeper@eaglepicher.com • Web Site: www.eaglepicher.com Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-15M-S3 3.5 1500 1.20 0.90 0.28 14.0 LTC-16M 3.5 1600 1.72 1.00 0.39 19.7 LTC-16M-S1 3.5 1600 0.90 0.27 1.50 16.0 * LTC-16M-MP-S2 3.5 3200 1.59 0.98 0.68 33.0 LTC-16M-MS-S2 7.0 1600 1.74 1.02 0.68 40.0 LTC-16M-SM-S1 3.5 1600 1.50 0.90 0.27 18.0 * Supplied with Molex connector WE CAN DESIGN TO FIT ANY APPLICATION. Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. DISTRIBUTED LOCALLY BY: Specifications LTC-16M Nominal Open Circuit Voltage, 25°C ............................ 3.67 volts Nominal Working Voltage, 25°C...................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C ........................ 1600 mAH Volume ...................................................................... .626 cu. in. Weight ........................................................................ 19.7 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: Ryton™ module Terminal and Support Pins are .030" dia. (solder tinned) 1.60 .050 .24 .60 .025 STAND OFFS (4 Pls.) .36 .25 1.00 1.72 POWER LEADS .50 SUPPORT PINS (2 Pls.) MAY OR MAY NOT BE ELECTRICALLY CONNECTED TO NEGATIVE BATTERY POLARITY. Specifications LTC-16M-MS-S2 Nominal Open Circuit Voltage, 25°C .............................. 7.3 volts Nominal Working Voltage, 25°C...................................... 7.0 volts Nominal Capacity (350 hr. rate), 25°C ........................ 1600 mAH Volume ...................................................................... 1.20 cu. in. Weight ........................................................................ 40.0 GMS Operating Temperature ...................................... -40°C to +95°C Case Material: Noryl 1.020 0.675 1.740 The specifications on this sheet may be changed by Eagle-Picher Technologies, LLC, without notice.
