FRONT BRAKE CALIPER (2WD)
2003 TOYOTA TACOMA (RM1002U)
REMOVE PISTON AND CYLINDER BOOT
Put a piece of cloth or an equivalent between the piston
Use compressed air to remove the piston and cylinder
boot from the caliper.
Do not place your fingers in front of the piston when using
REMOVE PISTON SEAL FROM BRAKE CALIPER
Using a screwdriver, remove the piston seal.
REMOVE SLIDING BUSHING AND BOOT
Remove the sliding bushing and pin boot from the torque plate.
At the time of installation, ensure that the sliding bushing and
boot are secured firmly to the caliper grooves.