Loading ...
Global Do...
News & Politics
36
0
Try Now
Log In
Pricing
ASPEN SUPERIOR 1-10 DIP PAGE 1 OF 2 Aspen Veterinary Resources, LTD., 3155 Heartland Drive Liberty, MO 64068 MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT IDENTIFICATION Trade Name: ASPEN SUPERIOR 1-10 DIP Chemical Name & Synonyms: DETERGENT - IODINE COMPLEX, IODINE TEAT DIP 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Ingredients/Identity: Hazardous Components: Content CAS No. ACGIH TLV OSHA PEL Surfactant-iodine complex 5.00% N/A 0.1 ppm (iodine vapor) N/A NOTE: Nonionic surfactant - iodine complex (irritant, providing a minimum of 1.0 % titratable iodine) 3. HAZARD IDENTIFICATION Primary Routes of Entry: Skin contact, eye contact Routes of Entry/Affects of Exposure Inhalation: Dusts or mists can cause irritation of the upper respiratory tract. Skin: Can cause skin irritation. Eyes: Can cause eye irritation. Ingestion: Moderately toxic. May cause gastric irritation, nausea, burning and staining of the mucus membranes, and localized necrosis. Chronic Effects of Exposure: May cause areas of dermatitis. Carcinogenicity: The components in this product are not listed in the IARC, NTP, OSHA, or PA lists of carcinogens. CA Proposition 65: N/A Medical conditions aggravated by exposure: May aggravate existing skin, eye, or respiratory conditions. First Aid Measures Oral Ingestion: DO NOT INDUCE VOMITING! Drink plenty of water or milk. Never give anything by mouth to an unconscious person. Get immediate medical attention. Special Note: NOTE FOR PHYSICIAN: For ingestion cases, gastric lavage with a soluble starch or protein solution will remove iodine from stomach. Further treatment may consist of correcting fluid and electrolyte imbalance. Skin Contact: Flush with water. Remove contaminated clothing and footwear. If irritation occurs or persists, get medical attention. Eye Contact: Flush eyes with plenty of clean, running water. If irritation occurs, get medical attention. Inhalation: N/A NOTE: Above data estimated from safety data for components. 4. FIRE AND EXPLOSION HAZARD DATA National Fire Prevention Association Hazard Ratings Health Hazard: 2 Flammability Hazard: 0 Reactivity Hazard: 1 Maximum Personal Protection: -- Flash Point (ºC): N/A - water base Test Method: N/A Recommended Extinguishing Media: Water, CO2, Foam, Dry Chemical, Earth or Sand Unusual Fire and Explosion Hazards (Conditions to Avoid): None known to EXL Laboratories, LLC. Special Fire Fighting Procedures: Do not direct a solid stream of water or foam into hot, burning pools; this may cause frothing, and increase fire intensity. Use self-contained breathing apparatus and protective clothing. ASPEN SUPERIOR 1-10 DIP PAGE 2 OF 2 5. HANDLING AND STORAGE Handling Precautions: CAUTION! Can cause eye and skin irritations. Protect eyes, skin and clothing from contact with product. Wear recommended protective equipment. Keep container tightly closed when not in use. Wash thoroughly after handling product. Other Precautions: Do not contaminate water or food by the use, storage, or disposal of this product. Keep container tightly closed when not in use. 6. SPECIAL PROTECTION INFORMATION Ventilation Requirements: Local exhaust Recommended personal protective equipment (normal use conditions): EYE PROTECTION - Chemical goggles; SKIN PROTECTION - Rubber gloves, rubber boots and rubber apron. 7. PHYSICAL DATA Appearance: Dark brown liquid Odor: Iodine Available Iodine: 10,000 ppm (1%) Water Miscibility: Complete Water Solubility: Complete Bulk Density: N/A Boiling Point: 100 degrees C, solvent Specific Gravity: 1.03 pH: 4.0-4.8 8. REACTIVITY DATA Stability under normal conditions: Stable Incompatibility (Materials to Avoid): Base; Other - many metals, ammonia, chlorine releasers Hazardous Decomposition Products - Thermal & Other (List): Thermal - Iodine vapors, carbon dioxides. Hazardous Polymerization: Will not occur. 9. ENVIRONMENTAL INFORMATION STEPS TO BE TAKEN IF MATERIAL IS SPILLED: For small spills, add dry material to contain. For large spills, dike to contain. Wearing recommended protective equipment, remove bulk of liquid. Add dry material to absorb remaining liquid; pick up and containerize spilled material for recover or disposal. Flush spill area with water to eliminate residues. Waste disposal method: This product does not meet the EPA criteria of a hazardous waste as specified in 40 CFR 261. Dispose of product in an approved landfill in accordance with state and local regulations. Dispose of in a licensed hazardous waste disposal facility in compliance with all applicable laws. 10. TRANSPORTATION INFORMATION UN classification must be verified with current packaging UN Information Shipping Name: Cleaning, Scouring or Washing Compound DOT Hazard Classification: Not restricted Emergency Telephone No: 1-800-424-9300 As the conditions or methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of the material. Information contained herein is believed to be true and accurate but all statements and suggestions are made without any warranty, express or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results obtained from the use thereof. Prepared by: Brian Saben Date Prepared: August 21, 2008