Exam4test 640-802 exam questions.pdf

Loading ...
Global Do...
News & Politics
Exam4Test 640-802 CCNA Braindumps 
Exam4Test 640-802 Exams
Cisco Cisco Certified Network Associate
 
O rder : 640-802 Exam
Practice Exam: 640-802
Exam Number/Code: 640-802
Exam Name: Cisco Certified Network  Associate
Questions and Answers: 293 Q&As 
Exam Description
1. Exam4Test offer free update service for three month.
After you purchase our product, we will offer free update in time for three month. 
2. High quality and Value for the 640-802 Exam.
Exam4Test Practice Exams for 640-802 are written to the highest standards of technical accuracy, provided by our 
certified subject matter experts and published authors for development.
3. 100% Guarantee to Pass Your CCNA exam and get your CCNA Certification.
We guarantee your success in the first attempt. If you do not pass the CCNA "640-802" (Cisco Certified Network 
Associate on your first attempt, send us the official result. We will give you a FULLY REFUND of your purchasing fee 
and send you another same value product for free.
4. Exam4Test CCNA 640-802 Exam Downloadable.
Our PDF or Testing Engine Preparation Material of CCNA 640-802 exam provides everything which you need to pass 
your exam. The CCNA Certification details are researched and produced by our Professional Certification Experts who 
are constantly using industry experience to produce precise, and logical. You may get "640-802 exam" questions 
from different websites or books, but logic is the key. Our Product will help you not only pass in the first Cisco 
Certified Network Associate( CCNA ) exam try, but also save your valuable time.
Comprehensive questions with complete details about 640-802 exam. 
640-802 exam questions accompanied by exhibits. Verified Answers Researched by Industry Experts and almost 
100% correct. 
Drag and Drop questions as experienced in the Real CCNA exam. 640-802 exam questions updated on regular basis. 
Like actual CCNA Certification exams, 640-802 exam preparation is in multiple-choice questions (MCQs). Tested by 
many real CCNA exams before publishing. 
Try free CCNA exam demo before you decide to buy it in http://www.Exam4Test.com 
High quality and Valued for the 640-802 Exam: 100% Guarantee to Pass Your 640-802 exam and get your CCNA 
Certification. Come to http://www.Exam4Test.com The easiest and quickest way to get your CCNA Certification.
Exam4Test professional provides CCNA 640-802 the newest Q&A, completely covers 640-802 test original topic. With 
our completed CCNA resources, you will minimize your CCNA cost and be ready to pass your 640-802 test on Your 
First Try, 100% Money Back Guarantee included! 
 
  
Page 1 of 6
 
 
 
 
 
  
 
640-802 Exam Study Guide
640-802 exam is regarded as one of the most favourite CCNA Certifications. Many IT professionals prefer to add 
640-802 exam among their credentials. Exam4Test not only caters you all the information regarding the 640-802 exam 
but also provides you the excellent 640-802 study guide which makes the certification exam easy for you.
Exam4Test Engine Features
Comprehensive questions and answers about 640-802 exam 
640-802 exam questions accompanied by exhibits
Verified Answers Researched by Industry Experts and almost 100% correct
640-802 exam questions updated on regular basis
Same type as the certification exams, 640-802 exam preparation is in multiple-choice questions (MCQs).
Tested by multiple times before publishing
Try free 640-802 exam demo before you decide to buy it in Exam4Test.com
Exam4Test Help You Pass Any IT Exam
Exam4Test.com offers incredib le career enhancing opportunities. We are a team of IT professionals that focus on providing 
our customers with the most up to date material for any IT certification exam. This material is so effective that we Guarantee 
you will pass the exam or your money back.
  
  
Exam : Cisco 640-802
Title : Cisco Certified Network Associate
1. Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command 
should be used to gather this information? (Choose two.)
A. the amount of available ROM
B. the amount of available flash and RAM memory
C. the version of the bootstrap software present on the router
D. show version
E. show processes
F. show running-config
Answer: BD
2. A network administrator is explaining VTP configuration to a new technician. What should the network 
administrator tell the new technician about VTP configuration? (Choose three.)
A. A switch in the VTP client mode cannot update its local VLAN database.
B. A trunk link must be configured between the switches to forward VTP updates.
C. A switch in the VTP server mode can update a switch in the VTP transparent mode.
D. A switch in the VTP transparent mode will forward updates that it receives to other switches.
E. A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision 
number.
F. A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP 
domain membership.
Answer: ABD
3. Refer to the exhibit. A network associate needs to configure the switches and router in the graphic so that the 
hosts in VLAN3 and VLAN4 can communicate with the enterprise server in VLAN2. Which two Ethernet segments 
would need to be configured as trunk links? (Choose two.)
 
 
 
Page 2 of 6
 
 
A. A
B. B
C. C
D. D
E. E
F. F
Answer: CF
4. Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)
A. It establishes a static route to the 172.16.3.0 network.
B. It establishes a static route to the 192.168.2.0 network.
C. It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
D. It configures the router to send any traffic for an unknown destination out the interface with the address 
192.168.2.4.
E. It uses the default administrative distance.
F. It is a route that would be used last if other routes to the same destination exist.
Answer: AE
5. Refer to the exhibit. Which two statements are true about the loopback address that is configured on RouterB? 
(Choose two.)
A. It ensures that data will be forwarded by RouterB.
B. It provides stability for the OSPF process on RouterB.
C. It specifies that the router ID for RouterB should be 10.0.0.1.
D. It decreases the metric for routes that are advertised from RouterB.
E. It indicates that RouterB should be elected the DR for the LAN.
Answer: BC
6. Which two locations can be configured as a source for the IOS image in the boot system command? (Choose two.)
A. RAM
B. NVRAM
C. flash memory
D. HTTP server
E. TFTP server
F. Telnet server
Answer: CE
7. What are two benefits of using VTP in a switching environment? (Choose two.)
A. It allows switches to read frame tags.
B. It allows ports to be assigned to VLANs automatically.
C. It maintains VLAN consistency across a switched network.
D. It allows frames from multiple VLANs to use a single interface.
E. It allows VLAN information to be automatically propagated throughout the switching environment.
Answer: CE
8. Which two values are used by Spanning Tree Protocol to elect a root bridge? (Choose two.)
A. amount of RAM
B. bridge priority
C. IOS version
D. IP address
E. MAC address
F. speed of the links
Answer: BE
9. Refer to the exhibit. Both switches are using a default configuration. Which two destination addresses will host 4 
 
 
 
Page 3 of 6
 
use to send data to host 1? (Choose two.)
A. the IP address of host 1
B. the IP address of host 4
C. the MAC address of host 1
D. the MAC address of host 4
E. the MAC address of the Fa0/0 interface of the R1 router
F. the MAC address of the Fa0/1 interface of the R1 router
Answer: AF
10. What are two advantages of Layer 2 Ethernet switches over hubs? (Choose two.)
A. decreasing the number of collision domains
B. filtering frames based on MAC addresses
C. allowing simultaneous frame transmissions
D. increasing the size of broadcast domains
E. increasing the maximum length of UTP cabling between devices
Answer: BC
11. Refer to the exhibit. The router has been configured with these commands:
hostname Gateway
interface FastEthernet 0/0
ip address 198.133.219.14 255.255.255.248
no shutdown
interface FastEthernet 0/1
ip address 192.168.10.254 255.255.255.0
no shutdown
interface Serial 0/0
ip address 64.100.0.2 255.255.255.252
no shutdown
ip route 0.0.0.0 0.0.0.0 64.100.0.1
What are the two results of this configuration? (Choose two.)
A. The default route should have a next hop address of 64.100.0.3.
B. Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.
C. The address of the subnet segment with the WWW server will support seven more servers.
D. The addressing scheme allows users on the Internet to access the WWW server.
E. Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address 
translation.
Answer: DE
12. What are two reasons a network administrator would use CDP? (Choose two.)
A. to verify the type of cable interconnecting two devices
B. to determine the status of network services on a remote device
C. to obtain VLAN information from directly connected switches
D. to verify Layer 2 connectivity between two devices when Layer 3 fails
E. to obtain the IP address of a connected device in order to telnet to the device
F. to determine the status of the routing protocols between directly connected routers
Answer: DE
13. A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results 
of making this change? (Choose two.)
A. The IOS image will be ignored.
B. The router will prompt to enter initial configuration mode.
C. The router will boot to ROM.
D. Any configuration entries in NVRAM will be ignored.
E. The configuration in flash memory will be booted.
 
 
Page 4 of 6
 
 
Answer: BD
14. Refer to the exhibit. Which two statements are true about interVLAN routing in the topology that is shown in the 
exhibit? (Choose two.)
A. Host E and host F use the same IP gateway address.
B. Router1 and Switch2 should be connected via a crossover cable.
C. Router1 will not play a role in communications between host A and host D.
D. The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces.
E. Router1 needs more LAN interfaces to accommodate the VLANs that are shown in the exhibit.
F. The FastEthernet 0/0 interface on Router1 and Switch2 trunk ports must be configured using the same 
encapsulation type.
Answer: DF
15. A company is installing IP phones. The phones and office computers connect to the same device. To ensure 
maximum throughput for the phone data, the company needs to make sure that the phone traffic is on a different 
network from that of the office computer data traffic. What is the best network device to which to directly connect the 
phones and computers, and what technology should be implemented on this device? (Choose two.)
A. hub
B. router
C. switch
D. STP
E. subinterfaces
F. VLAN
Answer: CF
16. Which two topologies are using the correct type of twisted-pair cables? (Choose two.) 
A.
B.
C.
D.
E.
Answer: DE
17. Refer to the exhibit. Assume that the routing protocol referenced in each choice below is configured with its 
default settings and the given routing protocol is running on all the routers. Which two conditional statements 
accurately state the path that will be chosen between networks 10.1.0.0 and 10.3.2.0 for the routing protocol 
mentioned? (Choose two.)
A. If OSPF is the routing protocol, the path will be from R1 to R3 to R4 to R5.
B. If OSPF is the routing protocol, the path will be from R1 to R2 to R5.
C. If OSPF is the routing protocol, the path will be from R1 to R5.
D. If RIPv2 is the routing protocol, the path will be from R1 to R3 to R4 to R5.
E. If RIPv2 is the routing protocol, the path will be from R1 to R5.
Answer: AE
18. Refer to the exhibit. After HostA pings HostB, which entry will be in the ARP cache of HostA to support this 
transmission?
A.
B.
C.
D.
E.
F.
Answer: D
 
 
Page 5 of 6
 
19. Refer to the exhibit. What could be possible causes for the "Serial0/0 is down" interface status? (Choose two.)
A. A Layer 1 problem exists.
B. The bandwidth is set too low.
C. A protocol mismatch exists.
D. An incorrect cable is being used.
E. There is an incorrect IP address on the Serial 0/0 interface.
Answer: AD
20. Refer to the exhibit. A network administrator is adding two new hosts to SwitchA. Which three values could be 
used for the configuration of these hosts? (Choose three.)
A. host A IP address: 192.168.1.79
B. host A IP address: 192.168.1.64
C. host A default gateway: 192.168.1.78
D. host B IP address: 192.168.1.128
E. host B default gateway: 192.168.1.129
F. host B IP address: 192.168.1.190
Answer: ACF
More 640-802 Information 
640-802  Cisco Certified Network Associate  
640-822  Interconnecting Cisco Networking Devices Part 1  
640-816  Interconnecting Cisco Networking Devices Part 2  
640-801  Cisco Certified Network Associate (CCNA)  
640-553  IINS Implementing Cisco IOS Network Security  
640-721  Implementing Cisco Unified Wireless Networking Essentials (IUWNE)  
640-811  Interconnecting Cisco Networking Devices  
640-821  Introduction to Cisco Networking Technologies  
Related 640-802 Exams
Other Cisco Exams
646-228 
646-653 
646-011 
642-564 
640-861 
640-460 
642-651 
646-276 
350-026 
642-504 
642-741 
642-291 
646-151 
642-655 
642-381 
350-021 
650-251 
642-811 
642-654 
640-821 
Page 6 of 6