Polywater Plus Silicone NN
TECHNICAL SPEC IF ICAT ION
Polywater Plus Silicone NN Lubricant is a high-
performance, specification-grade, cable pulling
lubricant. Lubricant NN provides superior tension
reduction and is suitable for all types of cable
pulling. It has primarily been used for long pulls of
heavy cable. In this type of pulling, its superior
tension reduction and continued lubrication while
pulling through water are well documented.
Polywater Plus Silicone NN is suitable for use
with factory lubricated duct. It continues to
lubricate under high sidewall pressure forces in
conduit bends. Lubricant NN is slow drying. The
residue is a thin, slippery film that retains its slip for
months after use.
Polywater Plus Silicone NN is a semi-gel that
pours thickly. While it can be applied by hand, it is
best to pour or pump the lubricant into the duct
Plus Silicone NN Lubricant
shows superior friction reduction on a variety of jacket
types. Typical friction coefficients at 200 lbs/ft (2.91
kN/m) normal pressure are shown. Test results are
based on the method described in the white paper,
"Coefficient of Friction Measurement on Polywater's
Friction Table, 2007" (polywater.com/FTable.pdf).
Values are averages based on cable jacket and
conduit materials from multiple manufacturers.
Coefficient of friction data on additional or specific
cable jackets or conduits came be obtained from
American Polywater Corporation.
Lubricates through water-filled duct
Superior friction reduction
Suitable for factory lubricated conduits
Clean and non-staining
Suitable for all t