310-879 SUN Other Certifications Braindump
ExamSoon 310-879 Exams
SUN SUN Certified System Support Engineer
O rder : 310-879 Exam
Practice Exam: 310-879
Exam Number/Code: 310-879
Exam Name: SUN Certified System Support Engineer
Questions and Answers: 120 Q&As
Free 310-879 Braindumps
Exam : SUN 310-879
Title : Sun Certified Partner Field Engineer, level 3
1. You have been asked to brief the customer regarding the power configuration of a Sun Fire 6800 for compliance
with Sun Fire Midframe Server Configuration Best Practices.
The Sun Fire 6800 power configuration is as follows:
1. 2 redundant transfer units (RTU)
2. Each RTU contains 2 redundant transfer switches (RTS)
Which three should you tell the customer about best practices for power configuration? (Choose three.)
A. If one RTS fails, the RTU will shutdown.
B. Both RTS in an RTU should be connected to the same power source.
C. Both RTS in each RTU do not load share and are in active-standby mode.
D. Both RTS in each RTU perform load sharing and are in active-active mode.
E. The Sun Fire rack has 2 RTUs that should be connected to a single power source.
F. The Sun Fire rack has 2 RTUs that each should be connected to a separate power source.
G. The RTS will attempt to switch incoming power to a second RTS module in the RTU in the event of a brownout or
power failure.
Answer: CFG
2. On a Sun Fire E2900 server, you modified the LOM network to 'static' from 'dhcp' using the setupnetwork
command. After answering all the questions, the LOM configuration came back to the lom> prompt. You type
shownetwork and notice the network setting is still 'dhcp' instead of 'static'. Which is most likely the problem?
A. 'Static' is an invalid option.
B. Your LOM revision level is too low.
C. LOM setup aborted before you finished.
D. You need to use the resetsc command after making the change.
Answer: D
3. A customer has forgotten the ALOM password for a user on a Sun Fire V210 system. The system is up and
running. How can you reset a forgotten ALOM from the OS?
A.