DIODE SANKEN.pdf

Loading ...
Global Do...
News & Politics
The information in this publication has been carefully checked and is believed to be 
accurate; however, no responsibility is assumed for inaccuracies.
Sanken reserves the right to make changes without further notice to any products herein in 
the interest of improvements in the performance, reliability, or manufacturability of its 
products.  Before placing an order, Sanken advises its customers to obtain the latest 
version of the relevant information to verify that the information being relied upon is 
current.
Application and operation examples described in this catalog are quoted for the sole 
purpose of reference for the use of the products herein and Sanken can assume no 
responsibility for any infringement of industrial property rights, intellectual property rights 
or any other rights of Sanken or any third party which may result from its use.
When using the products herein, the applicability and suitability of such products for the 
intended purpose or object shall be reviewed at the users responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the 
occurrence of failure and defect of semiconductor products at a certain rate is inevitable.  
Users of Sanken products are requested to take, at their own risk, preventative measures 
including safety design of the equipment or systems against any possible injury, death, 
fires or damages to the society due to device failure or malfunction.
Sanken products listed in this catalog are designed and intended for the use as components 
in general purpose electronic equipment or apparatus (home appliances, office equipment, 
telecommunication equipment, measuring equipment, etc.).  Before placing an order, the 
user’s written consent to the specifications is requested.
When considering the use of Sanken products in the applications where higher reliability 
is required (transportation equipment and its control systems, traffic signal control systems 
or equipment, fire/crime alarm systems, various safety devices, etc.), please contact your 
nearest Sanken sales representative to discuss and obtain written confirmation of your 
specifications.
The use of Sanken products without the written consent of Sanken in the applications 
where extremely high reliability is required (aerospace equipment, nuclear power control 
systems, life support systems, etc.) is strictly prohibited.
Anti radioactive ray design is not considered for the products listed herein.
This publication shall not be reproduced in whole or in part without prior written approval 
from Sanken.
Gallium arsenide is used in some of the products listed in this publication.  These products 
are dangerous if they are burned or smashed in the process of disposal.  It is also 
dangerous to drink the liquid or inhale the gas generated by such products when 
chemically disposed.
CAUTION / WARNING
SANKEN
DIODES
SILICON
Contents
Selection Guide
Symbols and Terms / trr Measurement Circuit
Taping Specifications
Marking Guide
Rectifier Diodes
High-Voltage Rectifier Diodes
Fast-Recovery Rectifier Diodes
Ultra-Fast-Recovery Rectifier Diodes
Damper Diodes
Schottky Barrier Diodes
GaAs Schottky Barrier Diodes
Avalanche Diodes with built-in Thyristor
Avalanche Diodes
Power Zener Diodes
Silicon Varistors
2
8
8
11
12
26
28
42
69
78
108
110
112
113
114
Index (Type No. Order)
118
1
SFPM-5 *
0.9
Type No.
  IF (AV)
(A)
IFSM
(A)
Remarks
Package
Page
—
4
2
4
2
Z
A
—
Z
A
—
—
—
— (1.2A)
—
—
—
—
4
4
4
4
6
6
6
6
6
6
6
6
6
6
A
A
A
A
A
A (1.2A)
A
A
A
A
6
Z
Y
Y
1
1
1
(120A)
2
(120A)
2
Z
Z
Z
Z
(120A)
Z
2
2
2
2
6
4
4
B
(35A)
C
(35A)
Surface Mount
Axial
Bridge.
Single-in-
line
Low-noise
type
Low-noise
type
SBD
SBD
FRD
FRD
Frame.
Center-tap
C (0.8A)
  (40A)
C
C
C
C
(150A)
C
(100A)
B
B (0.8A)
  (40A)
B
B (1.2A)
B
B
B
C (2.0A)
B
(150A)
8
(100A)
8
(170A)
30
12
13
14
15
16
17
18
20
22
25
24
26
SFPM-6 *
1.0
45
AM01 *
1.0
35
EM01 *
1.0
45
EM  1 *
1.0
45
EM  2 *
1.2
80
RM  1  *
1.0
50
RM  11 *
1.2
100
RM  10 *
1.5
150
RM  2 *
1.2
100
RO  2 *
1.2
80
RM  3 *
2.5
150
RM  4 *
3.0
200
RM  4 *M
3.2
350
RBV-40 *
4.0
80
RBV-40 *M
4.0
120
RBV-40 *H
4.0
120
RBV-60 *
6.0
150
RBV-60 *H
6.0
140
RBA-40 *B
4.0
40
RBA-100 *B
10.0
60
RBA-40 *L
4.0
80
RBV-60 *L
6.0
100
RBV-130 *
13.0
80
RBV-150 *
15.0
200
RBV-150 *S
15.0
150
RBV-250 *
25.0
350
FMM-2 *
10.0
100
FMM-3 *
20.0
120
40
60
100
200
400
600
800
1,000
VRM (V)
SHV-**
0.18
Type No.
  IF(AV)
(mA)
trr  1 
(µs)
Package
Page
02
03
10
12
14
16
20
24
2.0
06
0.15
08
10
10
12
0.15
08
12
Axial
SHV-**EN
SHV-**DN
2
3
6
8
10
12
14
16
20
24
VRM (kV)
26
Type No.
  IF (AV)
(mA)
Package
Page
350
—
0.1
9
8
Axial
HVR-1X
UX-F0B
VRM
(kV)
Diode for Microwave ovens
2
Rectifier Diodes
Selection Guide
High-Voltage Rectifier Diodes
t rr  1 
(µs)
RC 2
0.2
Type No.
  IF (AV)
(A)
Package
Page
—
4.0
1.30
EH  1 *
0.6
Z
100
200
400
600
800
VRM (V)
1,000
1,500
2,000
—
A
4.0
1.30
28
29
30
31
32
33
34
35
36
37
38
32
34
35
37
40
41
RH  1 *
0.6
Z
—
A
B
C
4.0
1.30
AS01 *
0.6
Z
—
A
1.5
0.60
ES01 *
0.7
Z
—
A
1.5
0.60
F (0.5A)
ES  1 *
0.7
Z
—
A
1.5
0.60
F (0.5A)
RS  1 *
0.7
A
B
1.5
0.60
AU01 *
0.5
Z
—
A
0.4
0.18
AU02 *
0.8
Z
—
A
0.4
0.18
EU  1 *
0.25
Z
—
A
0.4
0.18
EU  2 *
1.0
Z
—
A
0.4
0.18
EU01 *
0.25
Z
—
A
0.4
0.18
EU02 *
1.0
Z
—
A
0.4
0.18
RF  1 *
0.6
Z
—
A
B
0.4
0.18
RU  1 *
0.25
—
A
B
0.4
0.18
C (0.2A)
RU  2 *
1.0
Z
—
B
0.4
0.18
Axial
C (0.8A)
RU  2 *M
1.1
—
A
0.4
0.18
RU  20 *
1.5
A
0.4
0.18
B (1.1A)
RU  3 *
1.5
—
A
C
0.4
0.18
RU  3 *M
1.5
—
A
0.4
0.18
RU  30 *
3.5
Y
Z
0.4
0.18
— (2.0A) A (2.0A)
RU  4 *
3.5
Y
Z
0.4
0.18
— (3.0A) A (3.0A)
B (3.0A) C (2.5A)
RU  4 *M
3.5
—
A
0.4
0.18
AP01 *
0.2
C
0.2
0.08
EP01 *
0.2
C
0.2
0.08
EU  2 *X
1.2
Y
0.2
0.08
RU  2 *X
1.5
Y
0.2
0.08
RU  3 *X
2.0
Y
0.2
0.08
RU  4 *X
4.0
Y
0.2
0.08
FMU-1 *S/R
5.0
2
4
6
0.4
0.18
FMU-2 *S/R
10.0
1
2
4
6
0.4
0.18
FMU-3 *S/R
20.0
2
4
6
0.4
0.18
FMU-G1 *S
5.0
6
0.4
0.18
FMU-G2 *S
10.0
6
0.4
0.18
Frame.
1 Chip
FMU-G2 *XS
10.0
Y
0.2
0.08
Frame.
Center-tap
3
Fast-Recovery Rectifier Diodes
t rr  1 
(µs)
trr  2 
(µs)
t rr      : IF/IR (=IF)   90% Recovery Point (ex. IF/IR =100mA/100mA 90% Recovery Point)
t rr      : IF/IR (=2 IF) 75% Recovery Point (ex. IF/IR =100mA/200mA 75% Recovery Point)
1
2
SFPL-5 *
0.9
2
50
35
42
43
43, 44
44
45
45, 46
47
48
49
39
50
51
52
53
54
55
56
57
59
60
61
62
63
63
64
65
58
66
67
68
SFPL-6 *
1.0
2
50
35
Y (1.0A)
AG01 *
0.7
Z
—
100
50
A (0.5A)
Y (1.0A)
EG01 *
0.7
Z
—
100
50
A (0.5A)
C (0.5A)
Y (1.1A)
EG  1 *
0.8
Z
—
100
50
A (0.6A)
RG  1 *
0.7
C
100
50
Y (1.5A)
RG  10 *
1.2
—
100
50
A (1.0A)
Y (1.5A)
RG  2 *
1.2
Z
—
100
50
A (1.0A)
Y (3.5A)
RG  4 *
3.0
Z
—
—
100
50
A (2.0A)
C (2.0A)
EN01 *
1.0
Z
100
50
RN  1 *
1.5
Z
100
50
RN  2 *
2.0
Z
100
50
RN  3 *
3.0
Z
100
50
RN  4 *
3.5
Z
100
50
RP  1H
0.1
100
50
RU  1P
0.4
—
100
50
AL01 *
1.0
Z
50
35
EL  1 *
1.5
Z
— (350)
50
35
EL02 *
1.5
Z
50
35
RL  10 *
2.0
Z
50
35
RL  2 *
2.0
Z
— (350)
50
35
A (1.7A)
RL  3 *
3.5
Z
— (350)
50
35
A (2.0A)
RL  4 *
3.5
Z
A (3.0A)
50
35
RX  3 *
3.0
Z
30
25
FMG-1 *S/R
5.0
2
3
4
100
50
FMG-2 *S/R
10.0
2
3
100
50
4 (8.0A)
6 (6.0A)
FMG-3 *S/R
20.0
2
3
100
50
4 (16.0A)
6 (15.0A)
8 (800V)
8 (800V)
FML-1 *S
5.0
2
40
30
FMC-2 *U
3.0
70
35
FMC-G2 *S
3.0
70
35
58
FML-1 *S
5.0
3
4
50
35
FML-2 *S
10.0
2
40
30
FML-2 *S
10.0
3
4
50
35
FML-3 *S
20.0
2
40
30
FML-3 *S
20.0
3
4
50
35
FML-3 *S
20.0
6
6
65
35
FMX-1 *S
5.0
2
30
25
FMX-2 *S
10.0
2
30
25
FMX-2 *SL
15.0
2
30
25
FMX-3 *S
20.0
2
30
25
FMP-G1 *S
5.0
2
150
70
FMN-G1 *S
5.0
2
100
50
FMG-G2 *S
4.0
6
100
50
C (3.0A)
FMG-G3 *S
8.0
6
100
50
C (5.0A)
FML-G1 *S
5.0
2
40
30
FML-G1 *S
5.0
3
4
6
6
50
35
FML-G2 *S
10.0
2
40
30
FMX-G1 *S
5.0
2
30
25
FML-G2 *S
10.0
65
40
FMX-G2 *S
10.0
2
30
25
SPX-G3 *S
3.0
2
30
25
SPX-6 *S
6.0
2
30
25
Surface Mount
Axial
Power Surface 
Mount
Type No.
  IF(AV)
(A)
Package
Page
70
200
300
400
600
1,000
2,000
VRM (V)
Frame.
1 Chip
Frame.
Center-tap
4
Ultra-Fast-Recovery Rectifier Diodes
Selection Guide
t rr  1 
(ns)
t rr  2 
(ns)
t rr      : IF/IR (=IF)   90% Recovery Point (ex. IF/IR =100mA/100mA 90% Recovery Point)
t rr      : IF/IR (=2 IF) 75% Recovery Point (ex. IF/IR =100mA/200mA 75% Recovery Point)
1
2
for TV
for TV
for Display
for Display
RH  10F
0.8
Type No.
IF(AV) (A)
Package
Page
Remarks
1.3
Axial
4.0
60
60
60
50
50
50
50
50
50
50
1,500
RH  2D
1.0
1.3
1.3
4.0
1,300
RH  2F
1.0
69
70
71
4.0
1,500
RH  3F
2.5
1.3
4.0
1,500
RH  3G
2.5
1.3
4.0
1,600
RH  4F
2.5
1.3
4.0
1,500
RS  3FS
2.0
0.8
2.0
1,500
RS  4FS
2.5
0.4
1.0
1,500
FMV-G5FS
10.0
0.8
2.0
1,500
FMR-G5HS
10.0
0.7
1.8
1,800
VRM (V)
IFSM (A)
Type No.
IF(AV) (A)
Package
Page
Remarks
FMV-3FU
5.0
0.4
4.0
0.18
72
1.3
50
1,500
600
FMV-3GU
5.0
0.4
2.0
0.18
0.8
50
1,700
600
VRM (V)
Damper
For Compensation
IFSM (A)
Frame.
1 Chip
Type No.
IF(AV) (A)
Package
Page
Remarks
Axial
Axial
For 
Compensation
50
50
50
50
50
50
50
50
50
  5
20
73
74
74
RU  4D
1.5
  0.18
0.4
1,300
RU  4DS
2.5
  0.18
0.4
1,300
RP  3F
2.0
0.3
0.7
1,500
FMQ-G2FLS
10.0
0.4
1.2
1,500
FMQ-G2FS
10.0
0.2
0.5
1,500
FMQ-G5FMS
10.0
0.2
0.5
1,500
FMQ-G5GS
10.0
0.2
0.5
1,700
FMP-G2FS
5.0
0.3
0.7
1,500
FMP-G5HS
8.0
0.4
1.0
1,800
RG  2A2
0.5
  0.05
0.1
1,300
RC  3B2
1.0
    0.035
  0.07
1,600
VRM (V)
IFSM (A)
Frame.
1 Chip
Flame,
2 Chip in 1
Package
Flame,
2 Chip in 1
Package
FMP-3FU
5.0
Type No.
IF(AV) (A)
Package
Page
Remarks
0.1
0.7
0.05
0.3
50
1,500
600
76
FMQ-3GU
5.0
0.07
0.7
0.04
0.3
50
1,700
800
FMP-2FUR
5.0
0.1
0.7
0.05
0.3
50
1,500
600
VRM (V)
Damper
For Compensation
Damper
For Compensation Damper
For Compensation
Damper
For Compensation Damper
For Compensation
IFSM (A)
5
Damper Diodes
Damper Diodes for Diode Moduration
t rr      : IF/IR (=IF)   90% Recovery Point (ex. IF/IR =100mA/100mA 90% Recovery Point)
t rr      : IF/IR (=2 IF) 75% Recovery Point (ex. IF/IR =100mA/200mA 75% Recovery Point)
1
2
t rr      : IF/IR (=IF)   90% Recovery Point (ex. IF/IR =100mA/100mA 90% Recovery Point)
t rr      : IF/IR (=2 IF) 75% Recovery Point (ex. IF/IR =100mA/200mA 75% Recovery Point)
1
2
trr  1 (µs)
trr  2 (µs)
trr  1 (µs)
trr  2 (µs)
trr  1 (µs)
trr  2 (µs)
trr  1 (µs)
trr  2 (µs)
SFPA-6 *
SFPA-7 *
3.0
2.0
SFPA-5 *
1.0
Type No.
 IF (AV)
(A)
Package
Remarks
Page
82
78, 90, 98
82
Low VF
Low VF
Low VF
Low VF
Low VF
Axial
Low IR
Low IR
Low IR
Low IR
84
79, 88, 100, 104
88, 100, 104
84
79, 88, 100, 104
92
80, 92, 102, 106
80, 92
94, 102, 106
94
80, 94, 102, 106
80, 94
94
80, 94, 102, 106
96
25
86
Surface Mount
Bridge.
Single-in-line
Power
Surface Mount
20
30
40
60
90
VRM (V)
SFPB-6 *
1.5
2 (2.0A)
6
9
78, 90, 98
82
78, 90, 98
82, 90
82
4
SFPE-6 *
SFPJ-5 *
SFPJ-6 *
SFPJ-7 *
2.0
1.0
2.0
3.0
SFPB-7 *
2.0
2 (3.0A)
6
4
4
EA  0 *
1.0
3
88, 100, 104
AK  0 *
1.0
6 (0.7A)
9 (0.7A)
3
3
3
3
3
3
3
3
4
EK  0 *
1.0
2
6 (0.7A)
9 (0.7A)
3
4
EK  1 *
1.5
2
6
9
3
4
RK  1 *
1.7
6 (1.5A)
9 (1.5A)
3
4
RA  1 *
2.0
3
RK  3 *
2.5
6 (2.0A)
9 (2.0A)
3
4
RK  4 *
3.0
2
6 (3.5A)
9 (3.5A)
3
3
4
84
RJ  4 *
3.0
3
FMB-G1 *
3.0
4
FMB-G1 *L
5.0
2
6 (6.0A)
9 (4.0A)
4
FMB-G2 *H
10.0
2
4
FMB-2 *
4.0
6
9
4
FMB-2 *M
6.0
4
FMB-2 *L
10.0
2
6
9 (8.0A)
4
FMB-2 *H
15.0
2
4
FMB-3 *S
12.0
4
93
FME-2 *L
FME-2 *H
10.0
15.0
4
4
FMB-3 *
15.0
2 (20A)
6
9
4
FMB-3 *M
30.0
2
6
9 (20A)
4
CTB-2 *
4.0
4
CTB-2 *L
10.0
4
CTB-3 *
15.0
4
CTB-3 *M
30.0
4
RBA-40 *B
4.0
6
4
RBA-100 *B
10.0
4
SPB-G3 *S
3.0
4
4
SPB-G5 *S
5.0
6
SPB-6 *S
6.0
4
SPJ-6 *S
6.0
SFPB-5 *
1.0
6 (0.7A)
9 (0.7A)
2
4
SSB-1 *
0.5
90
MPE-2 *H
15.0
4
4
GSC215
5
7
150
GSC218
5
7
180
GSC315
14
10
150
GSC318
14
10
180
GSF18R
7
10
180
108
108
Type No.
IF(AV) (A)
Package
Full-mold
Page
Remarks
t rr (ns)
VRM (V)
6
Frame.
1 Chip
Frame.
Center-tap
Frame. 1 Chip
Frame.
Center-tap
Schottky Barrier Diodes
Selection Guide
GaAs Schottky Barrier Diodes
1500
50
450
20
113
113
113
PZ628
65
SFPZ-68
20
2
SPZ-G36
30
11
Type No.
PR (W)
Axial
Surface Mount
Power Surface Mount
Page
Package
VDC (V)
IZSM (A)
28±3
28±3
   36±3.6
VZ (V)
RZ1030
20
RZ1040
28
RZ1055
40
30
RZ1065
50
RZ1125
105
RZ1150
125
RZ1175
150
RZ1200
180
EZ0150
125
RZ1100
80
110
Type No.
ITSM (A)
Package
Axial
Page
VRDC (V)
  27  to  33
  34  to  40
  50  to  60
  60  to  70
115 to 135
  90 to 110
140 to 160
165 to 185
185 to 215
140 to 160
VZ (V)
SV-2SS
150
4
2
1.8
114
115
116
1.5
2.3
1.2
1.8
2.35
3.0
3.5
SV-3SS
250
SV-4SS
150
  Axial
VR-60SS
400
SV  02YS
200
SV  03YS
150
SV  04YS
100
Axial
SV  05YS
80
SV  06YS
70
VR-61SS
150
Type No.
VF (V)
Remarks
Symmetrical type
Unsymmetrical type
Page
Package
IF (mA)
RM  25
40
RM  26
50
3.0
R  2M
130
1.0
112
RY  23
200
RY  24
400
0.1
Type No.
IZSM (A)
Package
Axial
Page
VRM (V)
     50  to  61.5
  60  to  70
135 to 180
250 to 400
400 to 450
VZ (V)
7
Avalanche Diodes with built-in Thyristor
Avalanche Diodes
Power Zener Diodes
Silicon Varistors
Symbols and Terms / trr Measurement Circuit
Taping Specifications
Symbols and Terms
trr (Reverse Recovery Time) Measurement Circuit
VRSM
VRM
VP-P
VR
VF
VB
IF
IF (AV)
IFSM
IRSM
IR
IRP
IR (H)
IZ
IZSM
Ta
Tj
Topr
Tc
Tstg
trr
Ct
Rth ( j-   )
Rth ( j-c)
rz
Rz
PF (AV)
I2 t
Peak Reverse Surge Voltage
Peak Reverse Voltage
Reverse Voltage (Peak to Peak)
Reverse Voltage
Foward Voltage
Breakdown Voltage
Foward Current
Average Foward Current
Peak Foward Surge Current
Peak Reverse Surge Current
Reverse Current
Peak Reverse Current 
Reverse Current (Hight Temperature)
Avalanche Current
Allowable Avalanche Current
Ambient Temperature
Junction Tmeperature
Operating Ambient Temperature
Case Temperature
Storage Temperature
Reverse Recovery Time
Total Capacitance Between Terminals
Thermal Resistance, Junction to Lead
Thermal Resistance, Junction to Case
Temperature Coefficient of Breakdown Voltage
Equivalent Resistance of Breakdown region
Average Forward Power Dissipation
I2t Limitting Value
Taping name
Taping Dimensions (mm)
Package Dimensions (mm) and Markings
Quantity
The suffix “V” 
is added to the
Type No.
The suffix “V” 
is added to the
Type No.
V
V
Emboss taping
Reel
Axial taping
Reel
(1) The cathode is the right side of the feeding direction.
(2) The diodes are put inside the case with the electrode side down.
(3) A 150 to 200mm leader tape is provided at the beginning of the tape.
(4) 10 or more holes are left empty at the beginning and the end of each tape.
(5) Taping of diodes with electrodes facing the direction is also available (taping name: VL)
1,800 pcs/reel
5,000 pcs/reel
2.7    body
2.4    body
(4    body)
3,000 pcs/reel
20µs
200µs
100µF specimen
100Ω10mA10mAIFIRP0.1IRPt rr
20µs
200µs
100µF specimen
10Ω100mA100mAIFIRP0.1IRPt rr
20µs
200µs
100µF specimen
4Ω500mA500mAIFIRP0.1IRPt rr
4.5 ±0.2
0.052.0min
1.35±0.4
±0.4
±0.1
±0.1
1.35
5.1
+0.4
–0.1
+0.5
–1.0
+5
  0
+1
  0
+5
  0
+0.1
–0
+0.1–0.052.6±0.22.05±0.21.1
1.5
4.0
2.0
3.1
2.612.0±0.3±0.055.51.75±0.14.0
5.51.5
13
2.0
21
R1.0
178
14
2.0
65Type No., Lot No.,
Quantity
0.5max
1.0
5.08+0.380.5max
max52.0
(Blue)
(White)
6.0
6.0
0.5340Core Flange
81
75
25
83Type No., Lot No.,
Quantity
15
2975Fixture
8
IF = IRP = 10mA to 1mA
IF = IRP = 100mA to 10mA
IF = IRP = 500mA to 50mA
Feeding direction
1
2
2
±0.2
±0.2
±0.5
±0.5
±0.8
±2
±2
±2
±2±2±1±1±2
±0.1
±1.5
±0.5
Taping Specifications
The suffix “WS” 
is added to the
Type No.
The suffix “WK” 
is added to the
Type No.
WK
WS
The suffix “W” 
is added to the
Type No.
W
The suffix “V4” 
is added to the
Type No.
V4
The suffix “V3” 
is added to the
Type No.
V3
The suffix “VO” 
is added to the
Type No.
VO
The suffix “V1” 
is added to the
Type No.
V1
Radial taping
(for A0 series)
2,500 pcs/box
(2.4    body)
1,000 pcs/box
(5.2    body)
2,000 pcs/box
(2.7    body)
3,000 pcs/box
(2.4    body)
2,000 pcs/box
(2.7    body)
3,000 pcs/box
(2.4    body)
1,000 pcs/box
(4    body)
4,000 pcs/box
1,500 pcs/reel
(5.2    body)
2.7    body
0.6    lead only
Radial taping
(for A0 series)
Radial taping
Axial taping
Axial taping
Axial taping
Axial taping
Ammunition (Ammo) pack
Ammunition (Ammo) pack
Reel
Ammunition (Ammo) pack
Ammunition (Ammo) pack
Ammunition (Ammo) pack
0.5max
1.0
5.080.5max
max26.0
6.0
6.0
0.50.5max
1.0
5.080.5max
52.0
6.0
6.0
max0.50.5max
1.0
100.5max
52.0
6.0
6.0
max1.00.5max
1.0
100.5max
52.0
6.0
6.0
max1.04.0
6.35
12.7
2.6max
27.516.0(11.5)max
4.2
12.7
1.0max12.7
3.85
5.0
12.7
3.0max12.5min9.018.00
0.73.85
4.0
5.0
12.7
0.712.5min11max9.018.00
12.7
6.35
1.0max18.00.75.0
5.0
2.75
19.816.511.04.0
3.0
12.7
3.85
12.7
0
1.5
22.29.012.5min18.030°
Broken lines: 
perforation
255max
77m
ax
77maxType No., Lot No., Quantity
Broken lines: 
perforation
Type No., Lot No., Quantity
95max255max
51m
ax
Broken lines: 
perforation
77m
ax
Trade
Mark
Type No., Lot No., Quantity
255max
120maxBroken lines: 
perforation
Type No., Lot No., Quantity
ANODE
CATH
O
D
E
340max
140max55maxANODE
CATH
O
D
E
Type No., Lot No., 
Quantity
150max45max340max
340Core Flange
81
75
25
83Type No., Lot No.,
Quantity
15
2975Fixture
9
Taping name
Taping Dimensions (mm)
Package Dimensions (mm) and Markings
Quantity
(Blue)
(White)
(Blue)
(White)
(Blue)
(White)
(Blue)
(White)
+5
  0
+1
  0
+5
  0
+0.5
–1.0
+5
  0
+1
  0
+5
  0
+0.5
–1.0
+5
  0
+1
  0
+5
  0
+0.5
–1.0
+0.38+0.38±0.2+5
  0
+1
  0
+5
  0
+0.5
–1.0
±0.2±0.5±1.3
±1.0
±1.0
±0.2
±0.5
±0.3
±2.0
±2.0
±0.2
±0.2±0.5±0.3
±0.7
±1.0
±1.3
±0.7
±0.2±1.0
±0.5±0.5+1.0–0.5+0.8
–0.2
+1.0–0.5+0.5–0±2.0
±0.2
±0.5
±0.3
±1.0
±1.0±1.0±0.5±0.2±0.3
±0.7
±1.0
+0.8
–0
+1.0–0.5+1.0–0.5±2
±2
±0.1
±2
±2±1±1±2
Taping Specifications for Power Surface Mount
The suffix “VR” 
is added to the
Type No.
VR
The suffix “VL” 
is added to the
Type No.
VL
3,000 pcs/reel
3,000 pcs/reel
5,000 pcs/reel
8,000 pcs/reel
Taping Specifications for High-Voltage Diodes
The suffix “VD” 
is added to the
Type No.
VD
The suffix “V1” 
is added to the
Type No.
V1
Axial taping
Axial taping
Type No.
Lot No.
Quantitiy
Taping name
(type)
4
(6.0)
(2.0)(40
°)
(120°)
R95 ±1
80±1
330±2
23max17.5±0.52±0.52±0.513±1
1.5
2.0±0.1
8.0±0.1
3.4 max
0.3±0.1
6.8±0.1
13.5±0.110.6±0.14.0±0.1
1.6
7.5±0.116.0±0.31.75±0.16±1.0
6±1.0
3.5±0.558
1.0max
1.0max±1
6±1.0
6±1.0
5±0.558
1.0max
1.2max±1
Type No.
Quantity
Lot No.
29±1.5
75±1.5
340±2
25±129±1.5
75±1.5
340±2
25±110
R40
Taping name
Taping Dimensions (mm)
Package Dimensions (mm) and Markings
Quantity
Taping name
Taping Dimensions (mm)
Package Dimensions (mm) and Markings
Quantity
Type No.
Quantity
Lot No.
Feeding direction
Feeding direction
Material
Disk part: Cardboard
Axial core part: Foaming polystyrole
±0.5
±1
+0.1
–0
+0.1
–0
Type No. (abbreviation)
The AM01 Type No. is indicated as “M.” 
Class
Z: 200V    None: 400V    A: 600V
B: 800V    C: 1000V
Manufacturing date
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Cathode band: Continuous band
Color of markings: White
                              (Yellow for AU02 series)
Type No. (abbreviation)
EM01, EM2, EM1 are indicated as MO, M2
and M1, respectively.
Class
Z: 200V    None: 400V    A: 600V
B: 800V    C: 1000V    F: 1500V
    But EU02A is indicated as A2 and EU2YX
    as Y.
Manufacturing date
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Manufacturing period
        First 10 days of month
        Middle 10 days of month
        Last 10 days of month
Type No.
FMU-12S is indicated as “FMU12S.”
Polarity: Rectifier Symbol
Lot No.
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Third and fourth chracters: Day
Laser marking or White marking
Type No.: abbreviation
                 SFPB-64 is indicated as “C4”
Cathode band
Lot No.
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Type No.
Polarity: Rectifier Symbol
Lot No.
First character: Lot code
Second character: Year (Last digit of year)
Third character: Month (A to M except I)
Type No.: abbreviation
                 SSB-14 is indicated as “A”
Lot No.
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Type No.: Full name, However, CTB-34M
                 is indicated as CTB-34.
Polarity: Rectifier Symbol
Lot No.
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Third and fourth chracters: Day
Fifth character: None, However, CTB-34M
                         is indicated as M.
Laser marking or White marking
Type No.: 2 set marking
Manufacturing date and period: 2 set marking
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
        First 10 days of month
        Middle 10 days of month
        Last 10 days of month
Cathode band
Color of
markings:
White:  For Power Supply and SBD
Yellow: For Medium speed
Red:     For High-speed and ultra high-speed
Type No.
Lot No.
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Third character: A— First 10 days of month
                          B—Middle 10 days of month
                          C—Last 10 days of month
Input/output marking
Color of markings: RBV series: White marking
                               RBA series: Laser marking
Marking Guide
Note: hight-voltage rectifier diodes shall have different specifications.
Small TMD
TO220 Type
5
TO3P Type
SFP Type
SP Type (Power Surface Mount)
8
SS Type
9
E/EO Type TMD
2
R Type TMD / Large TMD
3
RBV/ RBA Type
4
(including full-mold type)
(including full-mold type)
MO
C
87
Cathode band
   Color: White
RK44
96
RBA
402
9
9B
FMU12S
8512
CTU-32S
7 D 0 5
FMG-G3CS
1 9 2 4
C468
M  A
9D(1-chip type)
11
B
A
6 H
64S
A 6 3
Type No.: Excluding last character
FML-G12S is indicated as “FML-G12.”
Last character of Type No.
Polarity: Rectifier Symbol
Lot No.
First character: Year (Last digit of year)
Second character: Month (1 to 9, O, N, D)
Third and fourth chracters: Day
Laser marking or White marking
FMLG12
0125
S
(1-chip type)
6
7
1
High-Voltage Rectifier Diode
Refer P26 to P27
10
➀
➁
➂
➀
➁
➂
➀
➁
➂
➀
➁
➂
➀
➁
➃
➀
➁
➂
➀
➁
➂
➃
➀
➁
➂
➀
➁
➂
➀
➁
➂
➃
➀
➁
➂
➀
➁
➂
➀
➁
➂
➀
➁
➀ ➁
➂
➀
➁
➂
➀
➁
➂
➀
➁
➂
➀
➁
➂
➃
➀ ➁
➂
➃
➀
➁
➂
➃
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
 0.3
0.5
0.7 
0.9
1.1
1.3
1.5
T  a    150°C
=
    60°C
    100°C
    25°C
 0.3
0.5
0.7 
0.9
1.1
1.3
T  a    150°C
=
    60°C
    100°C
    25°C
0     
 1
 5
40    
30     
 50
 10
25     
SFPM--52,54
t 1.6 P.C.B.
Solder Land
= 3.0 35µmCu
4.5 ±0.2
0.052.0min
1.35
1.35
5.1
+0.4
–0.1
2.62.051.1
1.5 ±0.2
±0.4
±0.4
±0.2±0.2±0.2
20ms
IFSM(A)External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
35     
20     
15     
10     
5     
0     
 1
 5
30     
 50
 10
25     
20ms
IFSM(A)20     
15     
10     
5     
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
SFPM--62,64
t 1.6 P.C.B.
Solder Land
= 3.0 35µmCu
SFPM-5 series
SFPM-6 series
Rectifier Diodes (Surface Mount)
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
 IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics (Ta = 25°C)
(°C/W)
(g)
Mass
Others
SFPM-52
200
0.9
0.9
1.0
1.0
400
200
400
1.0
10
20
0.072
45
30
50
1.0
0.98
SFPM-54
SFPM-62
SFPM-64
–40 to +150
A
10
1
0.1
0.01
0.001
20
10
1
0.1
0.01
0.001
12
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Ambient Temperature   Ta (°C)
Average Forward Current    IF(AV) (A)Ta—IF (AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Ambient Temperature  Ta (°C)
Average Forward Current    IF(AV) (A)Ta—IF (AV)  Derating
Forward Voltage   VF (V)
VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Forward Current   IF (A)Peak Forward Surge Current    IFSM (A)A
Fig.
Rth ( j-  )
0.5
0.7 0.9
1.1 1.3
 0.3
1.5
1.7
T  a    150°C
=
    60°C
    100°C
    25°C
0.1
0.3
10
1
0.01
0.001
0.1
10
1
0.01
0.001
50
0.1
10
1
0.01
0.001
40
0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1
T  a    150°C
=
    60°C
    100°C
    25°C
0.3
0.5
0.7
0.9
1.0
50.0±1.02.9±0.12.4±0.1
0.57 ±0.02
Cathode Mark
Cathode Mark
Cathode Mark
62.3±0.75.0±0.22.7±0.2
0.6 ±0.05
62.3±0.75.0±0.22.7 ±0.2
0.78 ±0.05
0
 1
 5
45
30
 50
 10
20
20ms
IFSM(A)10
40
0
 1
 5
45
30
 50
 10
20
20ms
IFSM(A)10
40
EM1B
EM1C
EM 1Y
EM 1Z
EM 1
EM 1A
0
 1
 5
35
20
 50
 10
10
20ms
IFSM(A)30
AM01 series
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
EM01 series
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
EM 1 series
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
L=10 mm
L=10 mm
P.C.B.
180•100•1.6 t
10mm
Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
  IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics (Ta = 25°C)
(g)
Mass
Others
AM01Z
200
AM01
400
AM01A
600
EM01Z
200
EM01
400
EM01A
600
EM 1Y
100
EM 1Z
200
EM 1
400
EM 1A
600
EM 1B
800
EM 1C
1000
1.0
1.0
1.0
1.0
10
22
0.13
35
45
45
35
20
100
50
0.98
–40 to +150
A
1.0
20
0.2
0.97
B
1.0
17
0.3
0.97
C
T  a    100°C
=
    60°C
    25°C
13
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage    VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Peak Forward Surge Current    IFSM (A)Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
C
Fig.
Solder
Copper Foil
(°C/W)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
0.5
0.6
0.7
0.9
1.0
1.1
0.8
5.0
1.0
0.5
0.1
0.05
0.5
0.7 
0.9
1.1
1.3
50
1
0.1
10
 0.3
1.5
T  a    150°C
=
    60°C
    100°C
    25°C
0.4
0.6 
0.8
1.0
1.2
 0.2
T  a    150°C
=
    60°C
    100°C
    25°C
62.5±0.77.2±0.24.0±0.2
0.78±0.05
62.3±0.75.0±0.22.7±0.2
0.78±0.05
0
 1
 5
 50
 10
40
80
20
0
 1
 5
40
 50
 10
30
10
50
RM 1B
RM 1C
RM 1Z
RM 1
RM 1A
20
0
 1
 5
100
60
 50
 10
40
80
20
60
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
RM1Z
RM1
RM1A
RM1B
RM1C
RM 11 series
EM 2  series
RM 1 series
0.01
0.001
30
1
0.1
10
0.01
0.001
L=10 mm
L=10 mm
P.C.B
180•100•1.6 t
10mm
Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
VR = VRM
max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics (Ta = 25°C)
(g)
Mass
Others
EM 2
400
EM 2A
600
EM 2B
800
RM 1Z
200
RM 1
400
RM 1A
600
RM 1B
800
RM 1C
1000
RM 11A
600
RM 11B
800
RM 11C
1000
1.2
1.2
10
50
17
0.3
80
0.92
A
1.0
1.0
5
50
1.5
10
50
15
0.4
50
0.95
0.8
40
1.2
1.2
100
0.92
B
–40 to +150
T  a    130°C
=
    100°C
    25°C
14
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF (AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF (AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF (AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Cathode Mark
Cathode Mark
Solder
Copper Foil
(°C/W)
Rth ( j-  )
VR = VRM
Ta = 100°C max
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
RM10Z
RM10
RM10A
RM10B
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
0.4
0.6 
0.8
1.0
1.2
 0.2
T  a    150°C
=
    60°C
    100°C
    25°C
0.05
0.1
0.5
1.0
5.0
0.5
0.6
0.7
0.8
0.9
1.0
1.1
0.05
0.1
0.5
1.0
5.0
0.5
0.6
0.7
0.8
0.9
1.0
1.1
0
 1
 5
 50
 10
20ms
IFSM (A)50
RM10Z
RM10
RM10A
RM10B
 1
 5
 50
 10
20ms
IFSM (A) 1
 5
 50
 10
20ms
IFSM (A)100
150
0
20
100
0
20
62.5±0.77.2±0.24.0±0.2
0.78±0.05
62.5±0.77.2±0.24.0±0.2
0.98±0.05
80
60
40
40
60
80
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
RM 10 series
RM 2  series
RO 2 series
1
10
50
0.1
0.01
0.001
L=15mm
L=15mm
P.C.B
180•100•1.6 t
Solder
10mm
Copper Foil
Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
VR = VRM
max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(g)
Mass
Others
RM 10Z
200
RM 10
400
RM 10A
600
RM 10B
800
RM 2Z
200
RM 2
400
RM 2A
600
RM 2B
800
RM 2C
1000
RO 2Z
200
RO 2
400
RO 2A
600
RO 2B
800
RO 2C
1000
1.5
1.5
10
50
15
0.4
120
1.2
150
1.2
100
0.91
A
–40 to +150
1.5
10
50
12
0.6
0.91
B
–40 to +150
1.2
80
1.5
10
50
12
0.61
0.92
–40 to +150
T  a    130°C
=
    25°C
    100°C
T  a    130°C
=
    25°C
    100°C
15
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Cathode Mark
Cathode Mark
VR = VRM
Ta = 100°C max
(°C/W)
Rth ( j-  )
Forward Voltage   VF (V)
Forward Current   IF (A)Forward Voltage   VF (V)
Forward Current   IF (A)Forward Voltage   VF (V)
Forward Current   IF (A)VF---IF  Characteristics (Typical)
VF---IF  Characteristics (Typical)
VF---IF  Characteristics (Typical)
0
25
50
75
100
125
150
0
0.5
1.0
1.5
2.0
2.5
Ambient Temperature   Ta (ºC)
0
25
50
75
100
125
150
0
3.00
3.75
2.25
1.50
0.75
20•20•1t  Cu Heatsink on both sidesWithout Heatsink
0
25
50
75
100
125
150
0
0.7
1.4
2.1
2.8
3.5
20•20•1t  Cu Heatsink on both sidesWithout Heatsink
0.5
0.7 
0.9
1.1
 0.3
Ta  
    100ºC
=
    25ºC
1
0.1
10
100
0
1.0
2.0
Ta=100ºCTa=25ºC50.0±0.11.4±0.1
6.5 ±0.2
8.0±0.262.5±0.71.2±0.05
5.2 ±0.2
9.1±0.20
 1
IFMS   Rating
IFMS   Rating
IFMS   Rating
 5
Peak Forward Surge Current    IFSM (A)Peak Forward Surge Current    IFSM (A)Peak Forward Surge Current    IFSM (A) 50
 10
20ms
IFSM(A)50
150
100
0
 1
 5
120
 50
 10
80
40
160
200
RM4B
RM4C
RM 4Y
RM 4Z
RM 4
RM 4A
0
 1
 5
 50
 10
20ms
IFSM(A)350
100
200
300
RM3C
RM 3 series
RM 4 series
RM 4M series
10
1
0.1
0.01
0.001
 0
0.2
0.4 
0.6
0.8
1.0
1.2
10
100
0.1
0.01
0.001
T  a    150ºC
=
    25ºC
    100ºC
1
L= 20 mm
L= 20 mm
P. C. B. 1.6 t
Solder Land
   5.5
5mm
5mm
5mm
5mm
Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(g)
Mass
Others
RM 3
400
RM 3A
600
RM 3B
800
RM 3C
1000
RM 4Y
100
RM 4Z
200
RM 4 
400
RM 4A
600
RM 4B
800
RM 4C
1000
RM 4AM
600
2.5
2.0
1.7
(3.0)
1.8
(3.2)
(150°C)
2.5
10
10
1.0
150
200
150
350
100
0.95
–40 to +150
A
3.0
10
8
1.2
50
3.5
10
8
1.2
50
B
0.95
0.97
0.92
16
Average Forward Current    IF (AV) (A)Ta—IF (AV)  Derating
Ambient Temperature   Ta (ºC)
Average Forward Current    IF (AV) (A)Ta—IF (AV)  Derating
Ta—IF (AV)  Derating
Ambient Temperature   Ta (ºC)
Average Forward Current    IF (AV) (A)IF (AV) (A)
50Hz
Half-cycle Sinewave 
Single Shot
Fig.
(  ) is with
Heatsink
Overcurrent Cycles
Overcurrent Cycles
Overcurrent Cycles
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Cathode Mark
Cathode Mark
(°C/W)
Rth ( j-  )
0
 1
 5
 50
 10
20ms
IFSM(A)10
100
20
30
40
50
60
70
80
90
0
 1
 5
 50
 10
20ms
IFSM(A)10
100
20
30
40
50
60
70
80
90
110
120
75
10
0
2
4
6
8
90
105
120
135
150
t /T   1/6
=
t /T  1/3, Sinewave
=
t /T   1/2
=
D.C.
100
0
110
120
130
140
150
4
8
12
16
20
t /T   1/6
=
t /T  1/3, Sinewave
=
t /T   1/2
=
D.C.
0
4
2
6
8
10
0
3
6
9
12
15
D.C.
T
t
Tj   150°C
=
t/T   1/6
=
t /T  1/3, Sinewave
=
t /T   1/2
=
5
0
10
15
20
25
0
4
8
12
16
20
D.C.
t /T   1/6
=
t /T  1/3, Sinewave
=
t /T   1/2
=
T
t
Tj   150°C
=
3.3
0.83.91.35
10.0
4.04.40.85
2.54
2.54
4.2
2.8
C0.5
2.4
9.0
15.0
16.95.02.83.516.520.020.00.83.3
3.4
2.3
1.0
5.45
5.45
5.0
0.65
2.6
S type
R type
S type
R type
13.5±0.50.45
±0.5±0.5FMM-2  series
FMM-3  series
Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
VR = VRM
max
Rth (j-c)
VR = VRM
Ta = 100°C max
IR
(µA)
 IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
FMM-22S, R
FMM-24S, R
FMM-26S, R
400
600
200
200
10
5.0
10
4.0
2.1
100
100
1.1
–40 to +150
A
FMM-32S, R
100
FMM-31S, R
FMM-34S, R
400
FMM-36S, R
600
20
10.0
10
2.0
5.5
120
100
1.1
B
17
IF (AV) (A)
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With Heatsink
Forward Power Loss   PF (W)Average Forward Current    IF (AV) (A)
IF(AV)—Pf  Characteristics
Case Temperature  Tc (°C)
Average Forward Current   IF (AV) (A)Tc—IF(AV)  Derating
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Forward Power Loss   PF (W)Average Forward Current    IF (AV) (A)
IF(AV)—Pf  Characteristics
Case Temperature  Tc (°C)
Average Forward Current   IF (AV) (A)Tc—IF(AV)  Derating
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
+0.2
–0.1
+0.2
–0.1
0
 1
 5
40
 50
 10
20
20ms
IFSM  (A)80
RBV-401, 402
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
40
RBV-404, 406
RBV-408, 40C
0
 1
 5
 50
 10
40
20ms
IFSM(A)100
60
0
 1
 5
40
 50
 10
20
20ms
IFSM80
60
80
20
60
0.5
1.0
 0
1.5
2.0
1
10
100
0.1
0.01
1
10
100
0.1
0.01
1
10
100
0.1
0.01
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.5
1.0
 0
1.5
2.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.5
1.0
 0
1.5
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
25
9.53.2
C3
7.5
7.5
7.5
134---1.0
4.6
3.6
15.017.50.7
–
+
±0.1
2.7±0.1
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
40
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
40
*RBV-406H  t rr 5.0µs
Bridge Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
Rth (j-c)
IR
(µA)
  IR (H)
(µA)
Tj
(ºC)
Tstg
(ºC)
Electrical Characteristics  (Ta = 25°C)
(ºC/W)
(g)
Mass
Others
RBV-401
100
200
400
600
4.0
2.0
10
5.0
4.05
–40 to +150
100
120
80
100
50
100
1.05
1.10
1.00
0.92
1.00
800
1000
600
600
RBV-402
RBV-404
RBV-406
RBV-408
RBV-40C
RBV-406M
RBV-406H
A
*
VR=VRM, T j=100°C
VR = VRM
18
IF (AV) (A) 
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With Heatsink
max per element
max per element
max per
element
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (ºC)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (ºC)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (ºC)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
  (A)
RBV-406M
0
 1
 5
 50
 10
40
20ms
IFSM (A)120
100
80
20
60
1
10
100
0.1
0.01
0.5
1.0
 0
1.5
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
40
RBV-406H
1
10
100
0.1
0.01
0.5
1.0
 0
1.5
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
40
    60°C
    100°C
    25°C
T  a    150°C
=
T  a    150°C
=
    60°C
    100°C
    25°C
0
 1
 5
 50
 10
40
20ms
IFSM (A)120
100
80
20
60
19
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
0
 1
 5
40
 50
 10
20
20ms
IFSM (A)120
RBV-601, 602
0
25
50
75
100
125
150
0
1.0
2.0
3.0
6.0
4.0
5.0
40
0
25
50
75
100
125
150
0
1.0
2.0
3.0
6.0
4.0
5.0
40
0
25
50
75
100
125
150
0
1.0
2.0
3.0
6.0
4.0
5.0
40
RBV-604, 606
RBV-608
0
 1
 5
 50
 10
40
20ms
IFSM (A)170
100
120
140
160
60
80
100
0
 1
 5
60
90
 50
 10
30
20ms
IFSM (A)150
120
80
20
60
–
+
*RBV-606H  t rr 5.0µs
*
0.5
1.0
 0
1.5
1
10
100
0.1
0.01
T  a    150°C
=
    60°C
    100°C
    25°C
0.5
1.0
 0
1.5
1
10
100
0.1
0.01
T  a    150°C
=
    60°C
    100°C
    25°C
0.5
1.0
 0
1.5
1
10
100
0.1
0.01
T  a    150°C
=
    60°C
    100°C
    25°C
10 7.5 7.5
30
11134-1.0
4.6
3.6
2.7
20.017.5C3
0.7
3.2±0.1
–
+
Bridge Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
Rth ( j-c)
IR
(µA)
 IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RBV-601
100
200
400
600
6.0
3.0
10
3.0
6.45
–40 to +150
170
150
140
120
100
200
1.00
1.05
0.95
1.05
800
600
RBV-602
RBV-604
RBV-606
RBV-608
RBV-606H
A
VR=VRM, T j=100°C
VR = VRM
20
IF (AV) (A) 
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With Heatsink
max per element
max per element
max per
element
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current   IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF (AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
0
25
50
75
100
125
150
0
1.0
2.0
3.0
6.0
4.0
5.0
40
RBV-606H
0
 1
 5
 50
 10
40
20ms
IFSM (A)140
120
100
80
20
60
1.4
0.2 0.4
0.6
0.8
1.0
1.2
 0
1
10
50
0.1
0.001
0.01
T  a    150°C
=
    60°C
    100°C
    27°C
21
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current   IF (AV) (A)Ta—IF(AV)  Derating
–
+
10 7.5 7.5
30
11134-1.0
4.6
3.6
2.7
20.017.5C3
0.7
3.2 ±0.1
–
+
Bridge Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
Rth ( j-c)
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RBV-1306
13
80
600
50
10
1.5
6.45
–40 to +150
1.05
RBV-1506S
15
7.5
RBV-1506
RBV-2506
150
1.2
6.5
1.1
200
200
100
350
12.5
25
A
0
 1
 5
 50
 10
100
20ms
IFSM (A)150
50
0
20 40
60 80 100 120 140 160
20 40
60
80 100 120 140 160
0
3
6
9
12
15
0
2
4
6
8
10
12
14
0
20 40 60 80 100 120 140 160
0
3
6
9
12
15
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
t /T  1/3,  Sinewave
=
t /T   1/6
=
t /T   1/2
=
D.C.
0
0
2
4
6
8
10 12 14
16
0
2
4
6
8
10
12
14
10
20
30
40
50
10
20
30
40
50
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
T
t
Tj   150°C
=
0
0
2
4
6
8
10 12 14
16
10
20
30
40
50
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
T
t
Tj   150°C
=
0
 1
 5
 50
 10
200
100
20ms
IFSM (A)150
50
RBV-1506S
0
 1
 5
 50
 10
60
40
20ms
IFSM (A)80
20
RBV-1306
RBV-1506
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
T
t
Tj   150°C
=
VR=VRM, T j=100°C
VR = VRM
22
IF (AV) (A) 
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With Heatsink
max per element
max per element
max per
element
Forward Power Loss   Pf (W)Average Forward Current   IF (AV) (A)
IF(AV)—Pf  Characteristics
Case Temperature  Tc (°C)
Average Forward Current   IF (AV) (A)Tc—IF(AV)  Derating
Overcurrent Cycles
IFMS   Rating
IF(AV)—Pf  Characteristics
Tc—IF(AV)  Derating
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Forward Power Loss   Pf (W)Average Forward Current    IF (AV) (A)
Case Temperature  Tc (°C)
Average Forward Current   IF (AV) (A)Overcurrent Cycles
Peak Forward Surge Current    IFSM (A)IF(AV)—Pf  Characteristics
Tc—IF(AV)  Derating
IFMS   Rating
Forward Power Loss   Pf (W)Average Forward Current   IF (AV) (A)
Case Temperature  Tc (°C)
Average Forward Current   IF (AV) (A)Overcurrent Cycles
Peak Forward Surge Current    IFSM (A)External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
0
 1
 5
 50
 10
350
200
20ms
IFSM(A)300
100
250
150
50
0
20 40
60 80 100 120 140 160
0
25
15
5
10
20
t /T  1/3,  Sinewave
=
t /T   1/6
=
t /T   1/2
=
D.C.
0
0
4
8
12
16 20
24 28
32
20
40
60
80
100
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
T
t
Tj =150°C
RBV-2506
23
Forward Power Loss   Pf (W)Average Forward Current    IF(AV) (A)
IF(AV)—Pf  Characteristics
Case Temperature  Tc (°C)
Average Forward Current   IF (AV) (A)Tc—IF(AV)  Derating
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
40
0
25
50
75
100
125
150
0
1.0
2.0
3.0
6.0
4.0
5.0
40
RBV-402L
0
 1
 5
 50
 10
40
20ms
IFSM (A)80
20
60
RBV-602L
0
 1
 5
 50
 10
40
20ms
IFSM (A)100
80
20
60
–
+
0.3
0.5 
0.7
0.9
 0.1
1.1
1.3
T  a    150°C
=
    60°C
    100°C
    25°C
0.2 0.4
0.6
0.8
1.0
1.2
1.4
1.6
    150°C
T  a=
    60°C
    100°C
    25°C
20
10
1
0.1
0.01
0.001
30
10
1
0.1
0.01
0.001
10 7.5 7.5
30
11134 -1.0
4.6
3.6
2.7
20.017.5C3
0.7
3.2±0.1
–
+
Bridge Diodes (Ultra-Fast-Recovery)
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
Rth ( j-c)
IR
(mA)
 IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RBV-402L
200
4.0
6.0
80
100
0.98
1.0
2.0
3.0
0.05
0.25
0.1
1.0
40
50
100/100
100/200
–40 to +150
30
35
5.0
4.05
3.0
6.45
RBV-602L
B
A
VR=VRM, Ta=100°C
VR = VRM
24
IF (AV) (A) 
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With 
Heatsink
max per element
max per element
max per
element
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➁
(ns)
t rr➀
(ns)
25
9.53.2
C3
7.5
7.5
7.5
134---1.0
4.6
3.6
15.017.50.7
–
+
±0.1
2.7±0.1
RBV-404B
10
20
40
30
0
 1
 5
 50
 10
20ms
IFSM(A)Bridge Diodes (Schottky Barrier)
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
Rth ( j-c)
IR
(mA)
IR (H)
(mA)
trr 
(ns)
Tj
(°C)
Tstg
(°C)
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RBV-404B
60
40
40
4.0
10.0
40
60
0.62
0.55
0.55
2.0
5.0
2.0
5.0
20
(Tj = 125°C)
35
100
100/100
–40 to +125
5.0
4.25
RBV-406B
RBV-1004B
A
10
20
50
40
30
60
0
 1
 5
 50
 10
20ms
IFSM(A)0
25
50
45
75
100
125
0
0.8
1.6
2.4
3.2
4.0
RBV-406B
0
25
50
40
75
100
125
0
0.8
1.6
2.4
3.2
4.0
RBV-1004B
0
0.5
1.0
1.5
20
10
1
0.1
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
50
10
1
0.1
0.001
0.01
0
0.2
0.4
0.6
0.8
1.0
1.4
1.2
50
10
1
0.1
0.001
0.01
0
10
30
50
20
40
20
10
1
0.1
0.01
0.001
0
10
30
70
60
20
50
40
30
10
1
0.1
0.01
0.001
0
10
30
60
20
50
40
100
10
1
0.1
0.01
0.005
10
20
40
30
0
 1
 5
 50
 10
20ms
IFSM(A)–
+
T  a    125ºC
=
    60ºC
    100ºC
    26ºC
   100ºC
T  a    125ºC
=
   60ºC
   25ºC
T  a    125ºC
=
    60ºC
    100ºC
    25ºC
   100ºC
T  a    125ºC
=
   60ºC
   25ºC
T  a    125ºC
=
    100ºC
    60ºC
    25ºC
   100ºC
T  a    125ºC
=
   60ºC
   25ºC
0
20
40
60
80 100 120 140
0
2
4
6
8
10
D.C.
t /T   1/2
=
t /T   1/6
=
t /T  1/3
=
Sinewave
T
t
Tj =125ºC
VR=40V
IF (AV) (A) 
VR=VRM, Ta=100°C
VR = VRM
25
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With 
Heatsink
max per element
max per element
max per
element
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Peak Forward Surge Current    IFSM (A)Reverse Voltage    VR (V) 
Reverse Current   IR (mA)VR—IR  Characteristics (Typical)
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Peak Forward Surge Current    IFSM (A)Reverse Voltage    VR (V) 
Reverse Current   IR (mA)VR—IR  Characteristics (Typical)
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Reverse Voltage    VR (V) 
Reverse Current   IR (mA)VR—IR  Characteristics (Typical)
Case Temperature  Tc (°C)
Average Forward Current   IF(AV) (A)Tc—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
25
9.53.2
C3
7.5
7.5
7.5
134---1.0
4.6
3.6
15.017.50.7
–
+
±0.1
2.7±0.1
3
27min
27min
20.55
27min
27min
0.510
2.50.527min
27min
2.56.5
2.527min
0.527min
SHV-02
SHV-03S
SHV-03
SHV-06EN
SHV-08EN
SHV-08DN
SHV-10EN
SHV-10DN
SHV-12EN
SHV-12DN
Type No.
External Dimensions
Marking (Cathode Mark)
Pattern
Color
White
White
White
Red
White
Red
White
Red
White
Red
A
B
E
F
C
C
D
D
G
H
Parameter
Type No.
Absolute Maximum Ratings
VRM
(kV)
IF (AV)
(mA)
IFSM
(A)
VF
(V)
IF
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
trr 
(µs)
50Hz
Half-cycle Sinewave 
Single Shot
Tc
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
Ta = 100°C
(g)
Mass
Others
Remarks
For general
FBT
For high-
frequency 
layer-built 
FBT
SHV-02
SHV-03S
SHV-03
SHV-10
SHV-12
SHV-14
SHV-16
SHV-20
SHV-24
SHV-06EN
SHV-08EN
SHV-10EN
SHV-12EN
SHV-10DN
SHV-12DN
HVR-1X-40B
UX-F0B
2
3
10
12
14
16
20
24
6
8
10
12
10
SHV-08DN
8
9
350
8
12
2.0
0.3
0.5
0.5
0.5
20
15
60
100
100
100
16
40
45
55
60
30
75
26
30
38
45
45
38
9
13.5
10
1
3
10/10
–40 to
+120
–40 to
+120
–40 to
+120
–40 to
+130
–30 to
+130
0.18
—
10
10
350
1
1
10
3
3
—
—
VZ = 9.5 to 15kV
VZ = 8.5kV min.
10/10
0.15
0.20
0.20
10/10
100/100
0.15
0.1
0.33
0.17
0.17
0.20
2.5
0.20
0.13
0.16
(Ta)
26
High-Voltage Rectifier Diodes
Fig.
For Ultra
high-frequency 
layer-built FBT
For 
Microwave Oven
For Inverter-type 
Microwave Oven
TV high
voltage
rectifier
Capacitive
load
(Unit: mm)
A
Fig.
B
Fig.
C
Fig.
D
Fig.
S
S
S
S
S
S
1.222min
22min
21±1
21±1
7±0.5
7±0.5HVR-IX 4
7±0.5
7±0.52
4
6
8
10
0
 0
1.0
2.0
12
14
16
18
20
22
24
 SVH-10 SVH-12 SVH-14 SVH-16 SVH-20 SVH-24Tc
100ºC
10
30.627min
27min
12
30.627min
27min
SHV-10
SHV-12
SHV-20
SHV-24
SHV-14
SHV-16
White
White
SHV series
1.221min
21min
UX-F0B
27
E
Fig.
F
Fig.
Type No.
External Dimensions
Marking (Cathode Mark)
Pattern
Color
(Unit: mm)
The SHV series of diodes have been miniaturized by resin on the assumption fo remolding.  Measures against creeping discharge and humidity stress must be taken when using
these diodes.
The taping specifications of the SHV series differ from ordinary diodes. (P.10)
Reverse Voltage  VP--P (kV)
V     —IF(AV)
P--P
Derating
Average Forward Current    IF(AV) (mA)G
Fig.
H
Fig.
0
25
50
75
100
125
150
0
0.1
0.2
0
 1
 5
 50
 10
20ms
IFSM (A)10
20
0
 1
 5
 50
 10
20ms
IFSM (A)10
30
20
0
 1
 5
 50
 10
20ms
IFSM (A)10
35
25
30
20
15
5
0.8
1.2
1.4
1.6
1.8
5
50
500
Ta=130ºC100ºC10
100
0.6
1.0
25ºC0.2
0.5
1.0
1.5
T     100ºC
a =
60ºC
25ºC
0.6
0.8
0.9
1.0
1.1
0.1
0.5
0.7
Ta=130ºC100ºC25ºC0.5
1.0
5.0
0.05
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
62.3±0.75.0±0.22.7 ±0.2
0.78±0.05
Cathode Mark
5
15
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0.25
0.15
0.05
1
10
0.1
0.01
0.001
RC 2 series
EH 1 series
RH 1 series
A
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
 IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 150°C max
IR
(µA)
IR (H)
(µA)
trr➀
(µs)
trr➁
(µs)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RC 2
2000
EH 1Z
200
EH 1
400
EH 1A
600
RH 1Z
200
RH 1
400
RH 1A
600
RH 1B
800
RH 1C
1000
0.2
20
2.0  0.2
10
300
4.0
10/10
10/20
–40 to +150
1.3
15
0.4
B
0.6
30
1.35 0.6
10
200
4.0
10/10
10/20
1.3
20
0.3
0.6
35
1.3  0.6
5
70
4.0
10/10
10/20
1.3
15
0.4
28
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)  
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Rth ( j-  )
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
62.3±0.75.0±0.22.7±0.2
0.78±0.05
Cathode Mark
50.0±1.02.9±0.12.4±0.1
0.57 ±0.02
Cathode Mark
0
25
50
75
100
125
150
0
0
25
50
75
100
125
150
0
ES01F
0.4
0.2
1.0
0
25
50
75
100
125
150
ES 1F
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
0.6
1.0 
1.4
1.8
 0.2
2.2
T  a    150ºC
=
    100ºC
    60ºC
    25ºC
0.6
1.0 
1.4
1.8
 0.2
2.2
2.6
T  a    150ºC
=
    100ºC
    60ºC
    25ºC
0.4
0.6 
0.8
1.0
 0.2
1.2
1.4
1.6
T  a    150ºC
=
    120ºC
    100ºC
    70ºC
    25ºC
0
 1
 5
 50
 10
20ms
IFSM (A)8
20
0
 1
 5
 50
 10
20ms
IFSM (A)30
20
10
0
 1
 5
 50
 10
20ms
IFSM (A)30
20
10
ES01F
ES01Z
ES01
ES01A
ES 1F
ES 1Z
ES 1
ES 1A
0.2
0.6
1.0
1.4
1.8
Ta=130ºC100ºC25ºC16
12
4
0.6
0.8
0.4
0.2
1.0
0.6
0.8
0
0.4
0.2
1.0
0.6
0.8
50
P.C.B. t 1.6
3.0 t50µCu
ES 1Z
ES 1
ES 1A
AS01 series
ES01 series
ES 1 series
ES 1F  ES 01F
1
10
20
0.1
0.01
0.001
1
10
30
0.1
0.01
0.001
1
10
40
0.1
0.01
0.001
0.1
0.01
0.001
1
ES01Z
ES01
ES01A
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
 IR (H)
(µA)
trr➀
(µs)
trr➁
(µs)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
AS01Z
200
AS01
400
AS01A
600
ES01Z
200
ES01
400
ES01A
600
ES01F
1500
ES 1Z
200
ES 1
400
ES 1A
600
ES 1F
1500
0.6
20
1.5
0.6
0.7
30
2.5
0.8
0.5
20
2.0
0.5
0.7
30
2.5
0.8
0.5
20
2.0
0.5
10
50
1.5
10/10
10/20
–40 to +150
0.6
22
0.13
B
10
200
1.5
10/10
10/20
0.6
20
0.2
C
10
200
1.5
10/10
10/20
0.6
17
0.3
29
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V) 
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
C
Fig.
Rth ( j-  )
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
50
P.C.B. t 1.6
3.0 t50µCu
50
P.C.B. t 1.6
3.0 t50µCu
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0
 1
 5
 50
 10
20ms
IFSM (A)25
15
30
20
10
 1
 5
 50
 10
20ms
IFSM (A) 1
 5
 50
 10
20ms
IFSM (A)5
0
15
10
5
0
25
15
20
10
5
 0.3
0.5
0.7 0.9
1.1
1.3
 0.1
1.5
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.4
0.6 0.8
1.0
 0.2
1.2
1.4
1.6
T  a    150ºC
=
    100ºC
    60ºC
    25ºC
50.0±1.02.9±0.12.4±0.1
0.57 ±0.02
Cathode Mark
RS 1 series
1
10
0.1
0.01
0.001
1
20
0.1
0.01
0.001
10
AU 02  series
AU 01 series
 0
0.2
0.4 0.6
1.0
1.2
1.4
1
10
0.1
0.01
0.001
T  a    150ºC
=
    25ºC
    100ºC
0.8
A
B
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
 IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics   (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RS 1A
600
RS 1B
800
AU01Z
200
AU01
400
AU01A
600
AU02Z
200
AU02
400
AU02A
600
0.7
30
2.5
0.8
10
200
1.5
10/10
10/20
–40  to  +150
0.6
20
0.4  
0.5
15
1.7
0.5
10
150
0.4
10/10
10/20
0.18
22
0.13
0.8
25
1.3
0.8
10
250
0.4
10/10
10/20
0.18
22
0.13
30
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
62.3±0.75.0±0.22.7±0.2
0.78±0.05
Cathode Mark
0
25
50
75
100
125
150
0
0.05
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0
25
50
75
100
125
150
0
0.05
0.10
0.15
0.20
0.25
0.10
0.15
0.20
0.25
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
0
 1
 5
 50
 10
15
10
5
20ms
IFSM(A)0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
T  a    150ºC
=
    25ºC
    100ºC
0.3
0.5 
0.7
0.9
1.1
 0.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0
 1
 5
 50
 10
15
10
5
20ms
IFSM(A)0
 1
 5
 50
 10
15
10
5
20ms
IFSM(A)EU01 series
EU02 series
EU 1 series
1
10
0.1
0.01
0.001
1
20
0.1
0.01
0.001
10
 0
0.2
0.6 0.8
1.2 1.4
1.8
1
10
0.1
0.01
0.001
T  a    150ºC
=
    25ºC
    100ºC
0.4
1.0
1.6
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
 IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
EU01Z
200
EU01
400
EU01A
600
EU02Z
200
EU02
400
EU02A
600
EU 1Z
200
EU 1
400
EU 1A
600
0.25
15
2.5 0.25
10
150
0.4
10/10
10/20
–40 to +150
0.18
20
0.2
B
1.0
15
1.4 1.0
10
300
0.4
10/10
10/20
0.18
20
0.2
0.25
15
2.5 0.25
10
150
0.4
10/10
10/20
0.18
17
0.3
31
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0
 1
 5
 50
 10
15
10
5
20ms
IFSM(A)0.3
0.5 
0.7
0.9
1.1
 0.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.4
0.6 
0.8
1.0
1.2
 0.2
T  a    150ºC
=
    70ºC
      100ºC
    25ºC
62.3±0.75.0±0.22.7 ±0.2
0.78 ±0.05
Cathode Mark
0
 1
 5
 50
 10
25
10
5
20ms
IFSM(A)15
20
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
0
25
50
75
100
125
150
0
0.15
0.45
0.6
0.6
0.8
0.9
1.0
1.1
0.1
0.5
0.7
Ta
=1
30
ºC
100ºC25ºC0.5
1.0
5.0
0.05
1.2
0
 1
 5
 50
 10
20ms
IFSM(A)15
10
5
RF 1 series
0.3
RF 1 series
EU 2YX
EU 2 series
1
10
0.1
0.01
0.001
1
10
0.1
0.01
0.001
20
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
A
B
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
EU 2Z
200
EU 2
400
EU 2A
600
EU 2YX
100
RF 1Z
200
RF 1
400
RF 1A
600
RF 1B
800
1.0
15
1.4
1.0
10
300
0.4
10/10
10/20
–40  to +150
0.18
17
0.3
1.2
25
0.9
1.2
0.2
0.08
0.6
15
2.0
0.6
10
200
0.4
10/10
10/20
0.18
15
0.4
32
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
0
25
50
75
100
125
150
0
1.5
0
25
50
75
100
125
150
0
0.15
0.1
0.15
0.2
0.25
1.2
0.9
0.6
0.3
0.6
0.05
1.1
0.6
0.8
0.9
1.0
1.1
0.1
0.5
0.7
Ta=130ºC100ºC25ºC0.5
1.0
5.0
0.05
1.2
0.7
0.1
0.5
1.0
2.0
1.0
0.8
0.9
Ta=130ºC25ºC100ºC0
 1
 5
 50
 10
20ms
IFSM(A)15
10
5
20
0.3
0.5 
0.7
0.9
1.1
 0.1
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0
 1
 5
 50
 10
20ms
IFSM(A)15
10
5
20
0
 1
 5
 50
 10
20ms
IFSM(A)15
10
5
RU 1 series
RU 2 series
RU 2M  series
1
10
0.1
0.01
0.001
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
 IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RU 1
400
RU 1A
600
RU 1B
800
RU 1C
1000
RU 2Z
200
RU 2
600
RU 2B
800
RU 2C
1000
RU 2M
400
RU 2AM
600
0.25
0.2
1.0
0.8
1.1
15
2.5
3.0
1.5
1.2
0.25
10
200
0.4
10/10
10/20
–40 to +150
0.18
15
0.4
20
1.0
10
300
0.4
10/10
10/20
0.18
15
0.4
20
1.1
10
300
0.4
10/10
10/20
0.18
15
0.4
33
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
0
25
50
75
100
125
150
0
1.5
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
60
1.2
0.9
0.6
0.3
 1
 5
 50
 10
20ms
IFSM(A)0
10
20
30
0.3
0.5
0.7
0.9
1.1
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.3
0.5 
0.7
0.9
1.1
 0.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
 1
 5
 50
 10
20ms
IFSM(A)0
50
10
20
30
40
 1
 5
 50
 10
20ms
IFSM(A)0
25
5
10
15
20
0
25
50
75
100
125
150
0
0.5
1.0
1.5
2.0
L=10mm
L=10mm
P. C. B.
180•100•1.6t
10mm
RU3,RU3A,RU3C
RU3B
0.2
0.4
0.6
0.8
1.0
1.2
1.4
T  a    100ºC
=
    25ºC
    50ºC
RU 2YX
RU 20A
RU 3 series
1
10
20
0.1
0.02
1
10
20
0.1
0.01
0.001
1
10
0.1
0.01
0.001
62.5±0.77.2±0.24.0±0.2
0.98±0.05
Cathode Mark
L=10mm
L=10mm
P. C. B.
180•100•1.6t
10mm
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RU 2YX
100
1.5
30
0.95 1.5
10
300
0.2
10/10
10/20
–40 to +150
0.08
15
0.4
A
RU 20A
600
RU 3
400
RU 3A
600
RU 3B
800
RU 3C
1000
1.5
1.5
1.1
1.5
50
20
1.1
1.5
2.5
1.5
1.5
1.0
1.5
10
350
0.4 100/100
100/200
0.18
15
0.4
B
10
400
0.4
10/10
10/20
0.18
12
0.6
34
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.5
0
25
50
75
100
125
150
0
0.5
1.0
1.5
2.0
0
25
50
75
100
125
150
0
1.0
2.0
2.5
3.0
3.5
0.1
1.5
2.0
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
0
 1
 5
 50
 10
200
80
40
20ms
IFSM(A)120
160
0.3
0.5 
0.7
0.9
1.1
 0.1
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.3
0.5 
0.7
0.9
 0.1
T  a    150ºC
=
    50ºC
    100ºC
    25ºC
0.3
0.5 
0.7
0.9
 0.1
1.0
1.2
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
1.5
0.5
60
Without Heatsink
180
140
100
60
20
RU 30Z 
RU 30
RU 30A
62.5±0.77.2±0.24.0±0.2
0.98±0.05
Cathode Mark
62.5±0.71.2 ±0.05
5.2±0.2
Cathode Mark
9.1±0.2With Heatsink5mm
20•20•1tCu
5mm
0
 1
 5
 50
 10
50
40
20ms
IFSM(A)30
20
10
0
 1
 5
 50
 10
50
40
20ms
IFSM(A)30
20
10
RU 3M, 3AM
RU 3YX
RU 30 series
1
10
20
0.1
0.01
0.001
1
10
0.1
0.01
0.001
1
50
0.1
0.01
0.001
10
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RU 3M
400
1.5
50
1.1
1.5
10
350
0.4
10/10
10/20
–40 to +150
0.18
12
0.6
A
RU 3AM
600
RU 3YX
100
RU 30Z
200
RU 30
400
RU 30A
600
2.0
1.5 (3.5)
2.0
50
80
200
0.95
0.97
0.95
2.0
3.5
2.0
10
300
0.2
10/10
10/20
0.08
12
0.6
B
10
300
0.4
10/10
10/20
100/100
100/200
0.18
10
1.0
35
RU 30Z 
RU 30
RU 30A
IF (AV) (A) 
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
(  ) is with
Heatsink
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Solder
Copper Foil
Solder
Copper Foil
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
0
25
50
75
100
125
150
0
1.0
2.0
3.0
0
 1
 5
 50
 10
20ms
IFSM(A)10
60
5mm
20•20•1tCu
5mm
0.4
0.8 
1.2
1.6
 0
2.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
20
30
40
50
0
 1
 5
 50
 10
20ms
IFSM(A)10
20
30
40
50
50.0±0.11.4±0.1
6.5±0.2
Cathode Mark
8.0±0.23.5
0
 1
 5
 50
 10
20ms
IFSM(A)10
20
30
40
50
60
70
RU 4Y, 4Z
RU 4, 4A, 4B
RU 4C
1
10
50
0.1
0.01
0.001
0.4
0.8 
1.2
1.6
 0
2.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
1
10
50
0.1
0.01
0.001
0.4
0.8 
1.2
1.6
 0
2.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
1
10
50
0.1
0.01
0.001
0
25
50
75
100
125
150
0
1.0
0.5
1.5
2.0
2.5
3.0
60
5mm
20•20•1tCu
5mm
0
25
50
75
100
125
150
0
1.0
0.5
1.5
2.0
60
5mm
20•20•1tCu
5mm
2.5
With HeatsinkA
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RU 4Y
100
RU 4Z
200
RU 4
400
RU 4A
600
RU 4B
800
RU 4C
1000
2.0 (3.5)
1.5 (3.0)
1.5 (2.5)
70
1.3
3.5
10
300
0.4
10/10
10/20
–40 to +150
0.18
50
1.5
1.6
3.0
50
500
100/100
100/200
8.0
1.2
36
IF (AV) (A) 
Without Heatsink
With HeatsinkWithout Heatsink
With HeatsinkWithout HeatsinkFig.
50Hz
Half-cycle Sinewave 
Single Shot
(  ) is with
Heatsink
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
0
 1
 5
 50
 10
20ms
IFSM(A)10
100
0
25
50
75
100
125
150
0
1.0
2.0
3.0
60
W
ithout Heatsink
With Heatsink3.5
0
25
50
75
100
125
150
0
1.0
2.0
4.0
60
3.0
W
ithout Heatsink
With Heatsink0.3
0.5 
0.7
0.9
 0.1
1.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
20
30
40
50
60
70
80
90
50.0±0.11.4 ±0.1
6.5±0.2
Cathode Mark
8.0±0.25mm
20•20•1tCu
5mm
5mm
20•20•1tCu
5mm
0
 1
 5
 50
 10
20ms
IFSM(A)10
20
30
40
50
60
70
RU 4M  series
RU 4YX 
1
10
50
0.1
0.01
0.001
 0
0.2
0.4 
0.6
1.0
1
100
0.1
0.01
0.001
T  a    150ºC
=
    25ºC
    100ºC
10
0.8
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RU 4M
400
RU 4AM
600
RU 4YX
100
2.0 (3.5)
2.2 (4.0)
0.4
–40 to +150
0.18
1.3
100/100
100/200
8.0
1.2
70
100
0.85
3.5
2.0
10
300
10
300
0.2
0.08
37
IF (AV) (A) 
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
(  ) is with
Heatsink
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(µs)
trr➁
(µs)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.1
0.05
0.15
0.2
0
25
50
75
100
125
150
0
0.1
0.05
0.15
0.2
AP01C
0
 1
 5
 50
 10
3
20ms
IFSM(A)5
2
1
4
EP01C
0
 1
 5
 50
 10
3
20ms
IFSM(A)5
2
1
4
1
0.1
0.01
0.001
10
1
0.1
0.01
0.001
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
50
P.C.B. t 1.6
3.0 t50µCu
1.0 
2.0
3.0
 0
4.0
T  a    150ºC
=
    100ºC
    25ºC
2.0
4.0
6.0
8.0
 0
10.0
T  a    150ºC
=
    100ºC
    25ºC
    70ºC
50.0±1.02.9±0.12.4±0.1
0.57 ±0.02
Cathode Mark
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
AP01C
1000
0.2
1000
5
4.0
0.2
100
5
500
50
200 100/100
100/200
–40 to +150
80
22.0
0.13
20.0
0.2
EP01C
B
A
38
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
RP 1H
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
0.1
0.5
0.01
0.001
0
1
2
3
4
5
6
7
0
25
50
75
100
125
150
0
0.02
0.04
0.06
0.08
0.1
RU 1P
0
25
50
75
100
125
150
0
0.4
0.3
0.2
0.1
0     
 1
 5
 50
 10
20ms
IFSM(A)1     
2     
3     
4     
5     
0     
 1
 5
 50
 10
20ms
IFSM(A)2     
4     
6     
8     
10     
    0.001 
    0.01 
    0.1 
   2 
    1 
 0
1.0
2.0
3.0
4.0
T  a    100ºC
=
    25ºC
    150ºC
T  a =
    100ºC
    25ºC
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RP 1H
2000
0.1
1000
0.4
5
10
7.0
4.0
0.1
0.4
20
5
10
50
100
100
10/10
100/100
10/20
100/200
–40 to +150
50
15
0.4
RU 1P
A
L=10mm
L=10mm
P.C.B
180•100•1.6t
10mm
39
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0
 1
 5
 50
 10
30
20ms
IFSM(A)10
D.C.
0
10
20
0
1
2
3
4
5
t /T  1/6
=
t /T  1/2
=
0
12
20
0
2
4
6
8
10
16
8
4
0
30
50
0
4
8
12
16
20
40
20
10
D.C.
t /T  1/6
=
t /T  1/3,  Sinewave
=
t/T  1/2
=
t /T  1/6
=
t /T  1/3,  Sinewave
=
D.C.
t /T  1/2
=
Tj =150ºC
T
t
0.3
0.5 
0.7
0.9
 0.1
1.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.3
0.5 
0.7
0.9
 0.1
1.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.3
0.5 
0.7
0.9
 0.1
1.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0
 1
 5
 50
 10
40
20
20ms
IFSM(A)30
10
25
20
15
5
0
 1
 5
 50
 10
80
40
20ms
IFSM(A)60
20
10
30
50
70
3.3
0.83.91.35
10.0
4.04.40.85
2.54
2.54
4.2
2.8
C0.5
2.4
9.0
15.0
16.95.02.83.516.520.020.00.83.3
3.4
2.3
1.0
5.45
5.45
5.0
0.65
2.6
13.5±0.50.45
±0.5±0.5t /T  1/3,  Sinewave
=
Tj =150ºC
T
t
Tj =150ºC
T
t
FMU-1 series
FMU-2 series
FMU-3 series
1
10
20
0.1
0.01
0.001
1
10
50
0.1
0.01
0.001
1
10
50
0.1
0.01
0.001
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
Rth ( j-c)
VR=VRM, Ta=100°C
VR = VRM
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
FMU-12S, R
200
FMU-14S, R
400
FMU-16S, R
600
FMU-21S, R
100
FMU-22S, R
200
FMU-24S, R
400
FMU-26S, R
600
FMU-32S, R
200
FMU-34S, R
400
FMU-36S, R
600
5.0
30
1.5
2.5
50
500
0.4 100/100
100/200
–40 to +150
0.18
4.0
2.1
10.0
40
1.5
5.0
50
500
0.4 100/100
100/200
0.18
4.0
2.1
20.0
80
1.5 10.0
50
500
0.4 100/100
100/200
0.18
2.0
5.5
B
IF (AV) (A)
40
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With 
Heatsink
max per element
max per element
max per
element
Average Forward Power    PF(AV) (W)Average Forward Current    IF(AV) (A)
IF(AV)—PF(AV)  Characteristics
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Power    PF(AV) (W)Average Forward Current    IF(AV) (A)
IF(AV)—PF(AV)  Characteristics
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Power    PF(AV) (W)Average Forward Current    IF(AV) (A)
IF(AV)—PF(AV)  Characteristics
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
S type
R type
S type
R type
t rr➀
(µs)
trr➁
(µs)
+0.2
–0.1
+0.2
–0.1
0
 1
 5
20
 50
 10
10
20ms
IFSM(A)30
0
 1
 5
 50
 10
10
20ms
IFSM(A)40
30
20
 1
 5
 50
 10
20ms
IFSM(A)100
80
60
40
20
0
70 80 90
110
4
0
100
150
5
3
2
1
120 130 140
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
70 80 90
110
8
0
100
150
10
6
4
2
120 130 140
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
70 80 90
110
8
0
100
150
10
6
4
2
120 130 140
t /T   1/6
=
t /T  1/3,  Sinewave
=
t /T   1/2
=
D.C.
0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.3
0.5 0.7
0.9
 0.1
1.1
1.3
1.5
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.3
0.5 
0.7
0.9
 0.1
1.1
1.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
3.3
0.83.91.35
10.0
4.04.40.85
5.08
4.2
2.8
C0.5
2.4
16.913.5±0.50.45
FMU-G16S
FMU-G26S
FMU-G2YXS
1
10
50
0.1
0.01
0.001
1
10
50
0.1
0.01
0.001
1
10
50
0.1
0.01
0.001
A
Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
Rth ( j-c)
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
FMU-G16S
600
5.0
30
1.25 5.0
FMU-G26S
600
10.0
40
1.35 10.0
FMU-G2YXS
100
10.0
100
1.0
10.0
50
500
0.4
100/100
100/200
–40 to +150
0.18
4.0
0.2
0.08
4.2
2.1
41
IF (AV) (A)
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
With 
Heatsink
VR=VRM, Ta=100°C
VR = VRM
max per element
max per element
max per
element
Case Temperature   Tc (°C)
Average Forward Current   IF(AV) (A)Tc—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Case Temperature   Tc (°C)
Average Forward Current   IF(AV) (A)Tc—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Case Temperature   Tc (°C)
Average Forward Current   IF(AV) (A)Tc—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)External Dimensions
(Unit: mm) (Full-mold)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(µs)
trr➁
(µs)
+0.2
–0.1
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.4 0.6 0.8 1.0
 0.2
1.2 1.4 1.6
0.4
0.6 
0.8
 0.2
1.0
1.2
1.4
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
t 1.6 P.C.B.
Solder Land
= 3.0 35µmCu
4.5±0.2
0.052.0min
1.35±0.4
1.35±0.4
5.1
2.6±0.22.05±0.21.1±0.2
1.5±0.2
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
t 1.6 P.C.B.
Solder Land
= 3.0 35µmCu
0     
 1
 5
 50
 10
25     
20ms
IFSM(A)20     
15     
10     
5     
0     
 1
 5
 50
 10
25     
20ms
IFSM(A)20     
15     
10     
5     
SFPL-62
SFPL- 52
1
10
0.1
0.01
0.001
1
10
0.1
0.01
0.001
20
Ultra-Fast-Recovery Rectifier Diodes (Surface Mount)
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Tj = 150ºC
IR
(µA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
SFPL-52
200
200
1.0
0.9
25
0.98 1.0
10
1.0
50 100/100
100/200
–40 to +150
35
20
0.072
SFPL-62
A
42
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
+0.4
–0.1
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0     
 1
 5
30     
 50
 10
25     
50.0±1.02.9±0.12.4±0.1
0.57±0.02
20ms
IFSM(A)20     
15     
10     
5     
0     
 1
 5
 50
 10
20ms
IFSM(A)5     
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
AG01 series
EG01Y, EG01Z, EG01
EG01Y
EG01Z, EG01
0
25
50
75
100
125
150
0
0.1
0.2
0.3
0.4
0.5
EG01A
25     
0     
 1
 5
 50
 10
20ms
IFSM(A)2     
4     
6     
8     
10     
L=15mm
L=15mm
P. C. B.
180•100•1.6 t
10mm
L=10mm
L=10mm
P. C. B.
180•100•1.6 t
10mm
1
30
0.1
0.01
0.001
1
0.1
0.01
0.001
10
AG01Y
AG01Z, AG01
AG01A
L=15mm
L=15mm
P. C. B.
180•100•1.6 t
10 mm
20     
15     
10     
 EG01Y
 EG01Z, EG01
 AG01Y
AG01Z, 
AG01, 
AG01A
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
T  a    25ºC
=
0.6
1.0 
1.4
1.8
 0.2
2.2
2.6
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.6 1.0 1.4 1.8
 0.2
2.2 2.6 3.0
T  a    150ºC
=
    70ºC
    100ºC
    25ºC
10
100
10
1
0.1
1000
0.01
0.001
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
Cathode Mark
A
B
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(mA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
AG01Y
70
AG01Z
200
AG01
400
AG01A
600
EG01Y
70
EG01Z
200
EG01
400
EG01A
600
1.0
0.7
25
15
1.2
1.8
0.7
1.0
0.1
0.5
100 100/100
100/200
–40 to +150
50
22
0.13
0.5
1.0
30
1.2
1.9
0.5
1.0
0.7
0.5
15
10
2.0
0.7
0.05
0.3
0.5
0.1
0.5
100 100/100
100/200
50
20
0.2
43
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
Solder
Copper Foil
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.1
0.2
0.3
0.4
0.5
0     
 1
 5
30     
 50
 10
25     
 EG 1Y
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
62.3±0.75.0±0.22.7±0.2
0.78±0.05
Cathode Mark
20ms
IFSM(A)20     
15     
10     
5     
0     
 1
 5
 50
 10
20ms
IFSM(A)2     
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
EG01C
EG 1Y, EG 1Z, EG 1
EG 1Y
EG 1Z, EG 1
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
EG 1A
4     
6     
8     
10     
 EG 1Z, EG 1
0     
 1
 5
 50
 10
20ms
IFSM(A)2     
4     
6     
8     
10     
L=15mm
L=15mm
P.C.B
180•100•1.6 t
10mm
L=15mm
L=15mm
P. C. B.
180•100•1.6 t
10mm
1.0
2.0 
3.0
4.0
 0
5.0
6.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.8
1.2 
1.6
2.0
 0.4
2.4
2.8
T  a    25ºC
=
0.8
1.2 
1.6
2.0
 0.4
2.4
2.8
T  a    25ºC
=
1
10
0.1
0.01
0.001
1
20
0.1
0.01
0.001
10
1
0.1
0.01
0.001
10
L=15mm
L=15mm
P. C. B.
180•100•1.6 t
10mm
B
VR = VRM
Ta = 100°C max
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
IR
(mA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
EG01C
1000
EG 1Y
70
EG 1Z
200
EG 1
400
EG 1A
600
0.5
10
3.3
1.2
1.7
1.8
2.0
0.5
0.05
1.1
30
1.1
0.1
0.8
15
0.8
0.05
0.6
10
0.6
0.1
0.5
0.3
0.5
100 100/100
100/200
–40 to +150
50
20
0.2
A
17
0.3
44
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
Solder
Copper Foil
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
0     
 1
 5
 50
 10
20ms
IFSM(A)0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
RG 1C
RG10 series
RG10Y
RG 2Y
50     
0     
 1
 5
 50
 10
20ms
IFSM(A)2     
4     
6     
8     
10     
L=15mm
L=15mm
P.C.B
180•100•1.6 t
10 mm
1
0.1
0.01
0.001
40     
30     
20     
10
L=15mm
L=15mm
P.C.B
180•100•1.6 t
10mm
RG10A
RG10
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
60
60
10     
0     
 1
 5
 50
 10
20ms
IFSM(A)50     
40     
30     
20     
10     
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
1.0
2.0 
3.0
4.0
 0
5.0
6.0
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.4
0.8 
1.2
1.6
 0
2.0
2.4
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
1
20
0.1
0.01
0.001
10
1
20
0.1
0.01
0.001
10
62.3±0.70.78±0.05
62.5±0.77.2±0.24.0±0.2
0.98±0.05
Cathode Mark
VR = VRM
Ta = 100°C max
B
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
IR
(mA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RG 1C
1000
RG 10Y
70
RG 10
400
RG 10A
600
RG 2Y
70
0.7
10
3.3
1.1
1.8
2.0
1.1
0.7
1.5
1.0
0.02
1.5
1.2
1.0
50
0.5
1.5
1.5
0.25
2.5
100 100/100
100/200
–40 to +150
50
15
0.4
A
12
0.6
45
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Solder
Copper Foil
Solder
Copper Foil
7.2±0.24.0±0.2
Cathode Mark
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0     
 1
 5
 50
 10
20ms
IFSM(A)0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
RG 2Z
RG 2
RG 2A
50     
1
0.1
0.01
0.001
40     
30     
20     
10
0
25
50
75
100
125
150
0
0.2
0.4
0.6
0.8
1.0
60
60
10     
0     
 1
 5
 50
 10
20ms
IFSM(A)50     
40     
30     
20     
10     
0
25
50
75
100
125
150
0
0.3
0.6
0.9
1.2
1.5
60
0     
 1
 5
 50
 10
20ms
IFSM(A)50     
40     
30     
20     
10     
0.2
0.4
0.6
0.8
1.0
1.2
T  a    25ºC
=
0.6
1.0 
1.4
1.8
 0.2
2.2
2.6
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.8
1.2 
1.6
2.0
 0.4
2.4
2.8
max  
min  
20
1
0.1
0.01
0.001
10
10
1
0.1
0.001
1000
100
0.01
62.5±0.77.2±0.24.0±0.2
0.98±0.05
Cathode Mark
VR = VRM
Ta = 100°C max
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
IR
(mA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RG 2Z
200
RG 2
400
RG 2A
600
1.2
1.0
1.5
1.8
2.0
1.5
1.0
50
0.5
2.5
100 100/100
100/200
–40 to +150
50
12
0.6
A
46
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0     
 1
 5
 50
 10
20ms
IFSM(A)RG 4Y
RG 4Z, RG 4, RG 4A
RG 4C
1
0.1
0.01
0.001
80     
60     
40     
10
0
25
50
75
100
125
150
0
0.4
0.8
1.2
1.6
2.0
40
20     
0     
 1
 5
 50
 10
20ms
IFSM(A)60     
40     
30     
20     
10     
0
25
50
75
100
125
150
0
60
0     
 1
 5
 50
 10
20ms
IFSM(A)100     
80     
60     
40     
20     
20
1
2
3
4
5
With HeatsinkWithout Heatsink
20•20•1t Cu
5mm
5mm
0
25
50
75
100
125
150
0
60
1
2
3
4
5
W
ith Heatsink
Without Heatsink
20•20•1tCu
5mm
5mm
20•20•1t Cu
5mm
5mm
RG 4Z, RG 4
RG 4A
70     
50     
30     
10     
RG 4Z, RG 4
RG 4A
50     
0.8
1.2
1.6
2.0
 0.4
2.4
2.8
T  a    25ºC
=
0.1
0.5 0.7 0.9 1.1 1.3 1.5 1.7
0.3
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.6
1.0 
1.4
1.8
 0.2
2.2
T  a    150ºC
=
    100ºC
    60ºC
    25ºC
1
0.1
0.01
0.001
10
30
1
0.1
0.01
0.001
6
50.0±1.01.4 ±0.1
6.5±0.2
Cathode Mark
8.0±0.2VR = VRM
Ta = 100°C max
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
IR
(mA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RG 4Y
70
RG 4Z
200
RG 4
400
RG 4A
600
RG 4C
1000
2.0 (3.5)
100
1.3
1.7
1.8
2.0
3.0
3.5
1.0
1.0 (3.0)
80
3.0
1.0 (2.0)
50
2.0
0.5
60
5.0
2.5
100
100/100
100/200
500/500
500/1000
–40 to +150
50
8
1.2
A
IF (AV) (A)
47
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
(  ) is with
Heatsink
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature  Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
Lead Temperature   T  (°C)
Lead Temperature   T  (°C)
IF(AV)— T   Characteristics   
IF(AV)— T   Characteristics   
EN01Z
RN 1Z
RN 2Z
t /T    1/6
=
Half-cycle sinewave
t /T    1/3
=
t /T    1/2
=
DC
0
0
1.0
2.0
2.0
1.5
0.5
t
T
1.0
0.5
1.5
100
0
1.0
0.5
110
120
130
140
150
t
T
Tj=150ºC
VR=200V
DC
t /T    1/6
=
t /T    1/3
=
Half-cycle sinewave
t /T    1/2
=
10
1
0.1
0.01
0.001
0
0.2
0.8
1.4
1.2
1.0
0.6
0.4
50
0
0
0.5
1.0
1.5
Half-cycle sinewave
t /T    1/3
=
t /T    1/2
=
DC
t /T    1/6
=
1.0
0.5
t
T
10
1
0.1
0.01
0.001 0
0.2
0.8
1.4
1.2
1.0
0.6
0.4
50
10
1
0.1
0.01
0.001
0
0.2
0.8
1.4
1.2
1.0
0.6
0.4
50
DC
t /T    1/6
=
t /T    1/3
=
Half-cycle sinewave
t /T    1/2
=
t
T
100
0
1.5
0.5
110
120
130
140
150
1.0
DC
t /T    1/6
=
t /T    1/3
=
Half-cycle sinewave
t /T    1/2
=
100
0
2.0
1.0
110
120
130
140
150
t
T
1.5
0.5
t /T    1/6
=
Half-cycle sinewave
t /T    1/3
=
t /T    1/2
=
DC
t
T
0
0
0.5
1.5
2
1
1.0
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
62.5±0.77.2±0.24.0±0.2
0.98±0.05
Cathode Mark
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
T  a =
    60ºC
    100ºC
    25ºC
T  a =
    60ºC
    100ºC
    25ºC
    150ºC
T  a =
    150ºC
    150ºC
    60ºC
    100ºC
    25ºC
VR = VRM
Tj = 150°C max
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
IR
(µA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
EN01Z
200
RN 1Z
200
RN 2Z
200
1.0
1.5
50
1
1.5
0.92
2
10
20
2.0
60
70
50
2
3
4
100 100/100
100/200
–40 to +150
50
15
0.4
B
20
0.2
A
12
0.6
C
48
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Average Forward Current    IF(AV) (A)Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Forward Power Loss   PF (W)Average Forward Current    IF(AV) (A)
PF(AV)—IF(AV)  Characteristics
Average Forward Current    IF(AV) (A)Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Forward Power Loss   PF (W)Average Forward Current    IF(AV) (A)
PF(AV)—IF(AV)  Characteristics
Average Forward Current    IF(AV) (A)Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Forward Power Loss   PF (W)Average Forward Current  IF(AV) (A)
PF(AV)—IF(AV)  Characteristics
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
C
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
IF(AV)— T   Characteristics   
Lead Temperature   T  (°C)
Tj=150ºC
VR=200V
Tj=150ºC
VR=200V
Tj =150°C
Tj =150°C
Tj =150°C
PF(AV)—IF(AV)  Characteristics
PF(AV)—IF(AV)  Characteristics
Lead Temperature   T  (°C)
Lead Temperature   T  (°C)
IF(AV)— T   Characteristics   
IF(AV)— T   Characteristics   
VF—IF  Characteristics (Typical)
RN 3Z
RN 4Z
t /T    1/6
=
Half-cycle sinewave
t /T    1/3
=
t /T    1/2
=
DC
DC
t /T    1/6
=
t /T    1/3
=
Half-cycle sinewave
t /T    1/2
=
t /T    1/6
=
Half-cycle sinewave
t /T    1/3
=
t /T    1/2
=
DC
DC
t /T    1/6
=
t /T    1/3
=
Half-cycle sinewave
t /T    1/2
=
10
1
0.1
0.01
0.001
0
0.2
0.8
1.4
1.2
1.0
0.6
0.4
50
10
1
0.1
0.01
0.001
0
0.2
0.8
1.4
1.2
1.0
0.6
0.4
50
0
0
1
3
100
0
110
120
130
140
150
0
0
100
0
110
120
130
140
150
t
T
t
T
t
T
t
T
1
2
3
2
1
2
3
1
2
3
4
5
1
2
3
1
2
3
62.5±0.71.2 ±0.05
5.2±0.2
Cathode Mark
9.1±0.250.0±0.71.4 ±0.1
6.5±0.2
Cathode Mark
8.0±0.2    150ºC
T  a =
    60ºC
    100ºC
    25ºC
    150ºC
T  a =
    60ºC
    100ºC
    25ºC
B
VR = VRM
Tj = 150°C max
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
IR
(µA)
IR (H)
(mA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RN 3Z
200
RN 4Z
200
3
3.5
80
0.92
3
50
120
3.5
6
6
100 100/100
100/200
–40 to +150
50
8
1.2
10
0.6
A
49
50Hz
Half-cycle Sinewave 
Single Shot
Fig.
Average Forward Current    IF(AV) (A)Forward Voltage   VF (V)
Forward Current   IF (A)Forward Power Loss   PF (W)Average Forward Current   IF(AV) (A)
VF—IF  Characteristics (Typical)
Average Forward Current    IF(AV) (A)Forward Voltage   VF (V)
Forward Current   IF (A)Forward Power Loss   PF (W)Average Forward Current   IF(AV) (A)
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
Tj=150ºC
VR=200V
Tj=150ºC
VR=200V
Tj=150ºC
Tj=150ºC
AL01Z
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
AL01Z
20
1.0
1.5
50 100/100
100/200
–40 to +150
35
17.0
22.0
0.13
0.3
EL 1Z
EL 1
A
B
200
25
1.30
0.98
10
100
200
1.5
1.0
350
500
50
EL 1Z
EL 1
4
16
12
8
20
0
 1
 5
 50
 10
20ms
IFSM(A)4
16
12
8
20
0
 1
 5
 50
 10
20ms
IFSM(A)5
20
15
10
25
0
 1
 5
 50
 10
20ms
IFSM(A)10
1
0.1
0.01
0.001
20
10
1
0.1
0.01
0.001
Ultra-Fast-Recovery Rectifier Diodes
20
10
1
0.1
0.01
0.001
0
0
25
50
75
150
0.2
0.4
0.6
0.8
1.0
125
100
0.8
0.4
2.0
1.6
1.2
 0
2.4
L=10 mm
L=10 mm
P.C.B
180•100•1.6 t
10 mm
0
0
25
50
75
150
0.3
0.6
0.9
1.2
1.5
125
100
50
P.C.B. t 1.6
3.0 t50µCu
0
0
25
50
75
150
0.3
0.6
0.9
1.2
1.5
125
100
50
P.C.B. t 1.6
3.0 t50µCu
0.4 0.6 0.8 1.0
 0.2
1.2 1.4 1.6
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
T  a    150ºC
=
    60ºC
      90ºC
    25ºC
50.0±1.02.9±0.12.4±0.1
0.57 ±0.02
Cathode Mark
62.3±0.75.0±0.22.7±0.2
0.78±0.05
Cathode Mark
50
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
Copper Foil
Solder
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
EL02Z
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
  IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
EL02Z
30
1.5
2.0
50
40
100/100
100/200
–40 to +150
35
30
15.0
20.0
0.2
0.4
RL 10Z
B
A
200
25
0.98
50
200
1.5
2.0
100
RL 10Z
6
24
18
12
30
0
 1
 5
 50
 10
20ms
IFSM(A)5
20
15
10
25
0
 1
 5
 50
 10
20ms
IFSM(A)20
10
1
0.1
0.01
20
10
1
0.1
0.01
0.001
Ultra-Fast-Recovery Rectifier Diodes
0
0
25
50
75
150
0.3
0.6
0.9
1.2
1.5
125
100
L=10 mm
L=10 mm
P.C.B
180•100•1.6 t
10 mm
Copper Foil
(35µmt)
0
0
25
50
40
75
150
0.4
0.8
1.2
1.6
2.0
125
100
0.5
1.0
1.5
 0
2.0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
62.3±0.75.0±0.22.7±0.2
0.6±0.05
Cathode Mark
L=15mm
L=15mm
P.C.B
180•100•1 .6 t
10 mm
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
62.5±0.77.2±0.24.0±0.2
0.78±0.05
Cathode Mark
51
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature    Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
B
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0
25
50
75
100
125
150
0
0.4
0.8
1.2
1.6
2.0
0     
 1
 5
30     
 50
 10
25     
20ms
IFSM(A)20     
15     
10     
5     
 1
 5
 50
 10
20ms
IFSM(A)RL 2Z
RL 2
RL 2A
40
L=10 mm
L=10 mm
P.C.B
180•100 •1.6 t
10 mm
0
25
50
75
100
125
150
0
0.4
0.8
1.2
1.6
2.0
L=10 mm
L=10 mm
P.C.B
180•100•1.6 t
10 mm
0
25
50
75
100
125
150
0
0.4
0.8
1.2
1.6
2.0
L=10 mm
L=10mm
P.C.B
180•100•1.6 t
10 mm
0.4
0.6 
0.8
1.0
 0.2
1.2
1.4
T  a    150ºC
=
    60ºC
    100ºC
    25ºC
T  a    150ºC
=
    25ºC
    100ºC
T  a    150ºC
=
    25ºC
    100ºC
1
10
20
0.1
0.01
0.001
0.5
1.0 
1.5
2.0
 0
2.5
3.0
1
10
20
0.1
0.01
0.001
0.5
1.0 1.5
2.5
2.0
 0
3.0
3.5
1
10
20
0.1
0.01
0.001
30
20
10
0
0     
 1
 5
30     
 50
 10
25     
20ms
IFSM(A)20     
15     
10     
5     
62.5±0.77.2±0.24.0±0.2
0.98±0.05
Cathode Mark
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RL 2Z
200
350
2.0
1.2
2.0
1.2
600
40
30
30
1.3
0.98
1.55
100
100
500
10
50
50 100/100
100/200
–40 to +150
35
12
0.6
RL 2
RL 2A
A
(Tj = 150°C)
100
(Tj = 150°C)
52
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Solder
Copper Foil
Solder
Copper Foil
Solder
Copper Foil
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )
0
25
50
75
100
125
150
0
1
2
3
4
5
0     
 1
 5
60     
 50
 10
50     
20ms
IFSM(A)40     
30     
20     
 1
 5
 50
 10
20ms
IFSM(A)RL 3Z
RL 3
RL 3A
80
0.4 0.6 0.8 1.0
 0
 0.2
1.2 1.4 1.6
T  a    150ºC
=
    25ºC
    100ºC
1
10
50
0.1
0.01
0.001
0.4
0.8
 0
1.6
1.2
2.0
1
10
50
0.1
0.01
0.001
0.5
1.0 
1.5
2.0
 0
2.5
3.0
1
10
20
0.1
0.01
0.001
60
40
20
0
20•20•1tCu
5mm
5mm
With HeatsinkWithout Heatsink
60
0
25
50
75
100
125
150
0
0.5
1.0
1.5
2.0
2.5
20•20•1t Cu
5mm
5mm
With Heatsink60
 1
 5
 50
 10
20ms
IFSM(A)80
60
40
20
0
10     
62.5±0.71.2±0.05
5.2±0.2
Cathode Mark
9.1±0.20
25
50
75
100
125
150
0
1
2
3
4
5
20•20•1t Cu
5mm
5mm
With HeatsinkWithout Heatsink
60
Ultra-Fast-Recovery Rectifier Diodes
Parameter
Type No.
Absolute Maximum Ratings
VRM
(V)
IF (AV)
(A)
IFSM
(A)
VF
(V)
IF
(A)
IF/IRP
(mA)
IF/IRP
(mA)
VR = VRM
max
VR = VRM
Ta = 100°C max
IR
(µA)
IR (H)
(µA)
Tj
(°C)
Tstg
(°C)
max
Electrical Characteristics  (Ta = 25°C)
(°C/W)
(g)
Mass
Others
RL  3Z
3.5
200
350
2.0
600
60
80
3.5
3.0
0.95
1.3
1.7
50
100
50
200
50 100/100
100/200
–40 to +150
35
10
1.0
RL 3
RL 3A
A
T  a    150ºC
=
    25ºC
    100ºC
T  a    150ºC
=
    60ºC
    100ºC
200
(Tj = 150°C)
200
(Tj = 150°C)
53
Fig.
50Hz
Half-cycle Sinewave 
Single Shot
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
Forward Voltage   VF (V)
Forward Current   IF (A)VF—IF  Characteristics (Typical)
Ambient Temperature   Ta (°C)
Overcurrent Cycles
IFMS   Rating
Peak Forward Surge Current    IFSM (A)Average Forward Current    IF(AV) (A)Ta—IF(AV)  Derating
External Dimensions
(Unit: mm)
Flammability:
UL94V-0 or Equivalent
A
Fig.
t rr➀
(ns)
t rr➁
(ns)
Rth ( j-  )