Today, technology is developing at the same rate in line with rapidly increasing human needs. The efforts made to meet these needs make life easier with each passing day and these studies are concentrated on robotic arm studies. The robotic arms work with an external user or by performing predetermined commands. In this study, education health and so on. A field controlled picker robot is designed and applied. Realized picker robot one robot arm and 3 wheels. The robot arm, DC motor, distance sensor, line tracking sensor, L298N motor driver, arduino uno, 3.7V 3A lithium battery are mounted under and above this vehicle chassis. Line sensors allow the robot to start its movement within a certain area without allowing it to move out of the area. When the distance sensors in the front part of the vehicle detects an object within a certain distance, it stops the movement of the motors and starts the robot arm movement which is formed with the help of 4 servos. The robot arm bends to the front at an angle of 150 degrees from the initial state and squeezes the garbage in front of it with the handle. It then turns 180 degrees behind and leaves the object in its chamber. With this picker robot to be realized with this study, garbage collection, cleaning and so on. works can be realized unmanned. Abdülkadir ÇAKIR "Field Controlled Picker Robot" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47588.pdf Paper URL : https://www.ijtsrd.com/engineering/mechanical-engineering/47588/field-controlled-picker-robot/abdülkadir-çakir
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 5 Issue 6, September-October 2021 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD47588 | Volume – 5 | Issue – 6 | Sep-Oct 2021
Page 1320
Field Controlled Picker Robot
Abdülkadir ÇAKIR
Isparta University of Applied Sciences, Faculty of Technology,
Department of Electrical and Electronics Engineering, Isparta, Turkey
ABSTRACT
Today, technology is developing at the same rate in line with rapidly
increasing human needs. The efforts made to meet these needs make
life easier with each passing day and these studies are concentrated
on robotic arm studies. The robotic arms work with an external user
or by performing predetermined commands. In this study, education
health and so on. A field controlled picker robot is designed and
applied. Realized picker robot; one robot arm and 3 wheels. The
robot arm, DC motor, distance sensor, line tracking sensor, L298N
motor driver, arduino uno, 3.7V 3A lithium battery are mounted
under and above this vehicle chassis. Line sensors allow the robot to
start its movement within a certain area without allowing it to move
out of the area. When the distance sensors in the front part of the
vehicle detects an object within a certain distance, it stops the
movement of the motors and starts the robot arm movement which is
formed with the help of 4 servos. The robot arm bends to the front at
an angle of 150 degrees from the initial state and squeezes the
garbage in front of it with the handle. It then turns 180 degrees
behind and leaves the object in its chamber. With this picker robot to
be realized with this study, garbage collection, cleaning and so on.
works can be realized unmanned.
KEYWORDS: robotic arm, motor drive, ribbon tracking
How to cite this paper: Abdülkadir
ÇAKIR "Field Controlled Picker Robot"
Published
in
International
Journal of Trend in
Scientific Research
and Development
(ijtsrd), ISSN