Repack Trailer Wheel Bearings With This Affordable Top Rated Ocala FL Company Looking for help repacking your trailer wheel bearings? If you answered 'yes', then this company is for you! R&B Hitch of Ocala has launched its trailer wheel bearings repacking service. The company offers replacement of trailer wheel bearings to prevent trailer breakdowns. The newly launched service by R&B Hitch is an import breakdown prevention measure since wheel bearings should be replaced every year or every six months if the trailer is used frequently. Without replacking them, it could result in being stranded somewhere. The first step R&B Hitch will take is to remove the outer bearing and support the frame or axles with jack stands. Then the wheel is removed along with the hub dust cap by using slip-joint pliers. Next, staff will unbend the cotter pin and grab the head with side cutters and leverage it out of the castle nut. The next step taken is to spin the nut off with pliers. Then the hub is pulled forward until the washer and outer bearing fall out. Removing the inner bearing is the next action carried out by first pulling the entire hub off the axle and placing it on the floor. Staff will then use their feet to hold it and pry out the grease seal with the seal puller. The next step staff will take is to clean the bearings by soaking them in the degreaser and using the parts brush to clean out all the old grease and dirt. Then the bearings will be set on a clean cloth to dry, or compressed air will be used on them. But don’t spin them with compressed air – they can fly apart and cause serious injuries. Go to rbhitchofocala.com/trailer- wheel-bearing-repack-and- lube-2 for more info!