Loading ...
Global Do...
News & Politics
8
0
Try Now
Log In
Pricing
- 1- Formula: CSA-0321 Material Safety Data Sheet HMIS HEALTH FLAMMABILITY 1 1 REACTIVITY PERSONAL PROTECTION 0 B SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Identity: Air Tool Oil Item No: 15000, 15002, 15003 Formula: CSA-0321 Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. Another Exclusive Product of: ITW Dykem Emergency Telephone Number 1-800-535-5053 (Domestic), 1-352-323-3500 (International) Address (Number, Street, City, State, and ZIP Code) 805 East Old 56 Highway Telephone Number for Information 1-800-443-9536 or 1-913-397-9889 Olathe, KS 66061-4914 Date Prepared 9/4/06 Product Class: Lubricants Signature of Preparer (Optional) Regulatory Dept. SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Components (Specific Other Limits Chemical Identity, Common Name(s) CAS No. OSHA PEL ACGIH-TLV Recommended %(Opt.) Severely Hydrotreated Naphthenic Petroleum Oil 64742-52-5 No data No data *5 mg/m3 90 – 99% Lard Oil 8016-28-2 No data No data *5 mg/m3 1 – 10% * If mists are generated in the use of this product; then the following values for petroleum oils apply. SECTION 3 HAZARDS IDENTIFICATION EMERGENCY OVERVIEW – Light colored oil with mild petroleum odor. May cause respiratory tract irritation. Avoid breathing vapor and spray mist. Avoid contact with skin and eyes. Use only with adequate ventilation. Observe usual precautionary measures for dealing with chemicals when handling material. POTENTIAL HEALTH EFFECTS Eyes: Oil may cause slight irritation. Skin: Oil may cause slight skin irritation. Ingestion: No data. Inhalation:: No data. CHRONIC HEALTH EFFECTS Prolonged repeated overexposure to this product may lead to skin sensitization or dermatitis. SECTION 4 FIRST AID MEASURES Eyes – Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists get immediate medical attention. Inhalation – Remove exposed person to fresh air. Get immediate medical attention. Skin – Flush skin with plenty of water. Remove contaminated clothing and shoes. Ingestion – If large quantities of this material are swallowed, get immediate medical attention. Never give anything by mouth to an unconscious person. SECTION 5 FIRE FIGHTING MEASURES Flash Point (Method Used) 212°F Flammable Limits LEL No data UEL No data Extinguishing Media - Use water fog, foam, dry chemical or CO2. Use water spray to cool fire-exposed containers and to protect personnel. Do not direct a solid stream of water or foam into burning molten material; this may cause spattering and spread the fire. Special Fire Fighting Procedures - Keep containers cool and vapors down with water spray. Prevent spill from entering drains, sewers, streams or other bodies of water. If run-off occurs, notify proper authorities. Unusual Fire and Explosion Hazards – Toxic fumes, gases or vapors may evolve on burning. - 2 - Formula: CSA-0321 SECTION 6 ACCIDENTAL RELEASE MEASURES SMALL SPILL: Allow liquid to cool, collect the solid material and place in non-leaking container; seal properly and dispose of properly in compliance with federal, state, and local regulations. LARGE SPILL: Allow liquid to cool, collect the solid material and place in non-leaking container; seal properly and dispose of properly in compliance with federal, state, and local regulations. SECTION 7 HANDLING AND STORAGE HANDLING: Empty containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, sparks, flames, static electricity, or other sources of ignition. STORAGE: Keep away from heat, sparks and open flames. Keep out of reach of children. Keep container tightly sealed when not in use. Store in cool, well-ventilated place away from incompatible materials. SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Respiratory Protection (Specify Type) – Not usually necessary. Use with adequate ventilation. Use NIOSH/MSHA approved respirator if PELs or TLVs are exceeded. Engineering Local Exhaust Not usually needed Special None Controls Mechanical (General) Not usually needed Other None Protective Gloves – Chemical resistant gloves if skin contact is possible (consult your safety equipment supplier). Eye Protection – Not normally required if used as intended. Wear chemical splash goggles in compliance with OSHA regulation if splashing is possible. Other Protective Clothing or Equipment - Not usually necessary. If direct contact is possible, wear apron, boots, face shield, gloves etc. as needed. Work/Hygienic Practices - Follow label instructions. Wash hands after use and before eating, drinking, smoking, using restrooms, etc. SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Boiling Point 400°F Specific Gravity (H2O = 1) @70o F 0.91 Vapor Pressure (mm-Hg @ 70o F) No data Solidification Point No data Vapor Density (AIR = 1) > 1 Evaporation Rate (Butyl Acetate = 1) < 1 Solubility in Water Insoluble pH (at g/l H20) (°C) No data Appearance and Odor – Light colored oil with mild petroleum odor. VOC: This product contains 122 grams per liter or 13.49% VOC. SECTION 10 STABILITY AND REACTIVITY Chemical Unstable Conditions to Avoid – None known. Stability Stable X Incompatibility (Materials to Avoid) - Strong oxidizing and reducing agents, strong alkalies and strong acids. Hazardous Decomposition or Byproducts - Carbon dioxide, carbon monoxide, smoke, soot and various organic oxidation by-products. Hazardous May Occur Conditions to Avoid - No data Polymerization Will Not Occur X SECTION 11 TOXICOLOGICAL INFORMATION Please refer to Section 3 for available information on potential health effects. - 3- Formula: CSA-0321 SECTION 12 ECOLOGICAL INFORMATION No specific ecological data are available for this product. Please refer to Section 6 for information regarding accidental releases and Section 15 for regulatory reporting information. SECTION 13 DISPOSAL CONSIDERATIONS Dispose of in accordance with all applicable local, state and federal regulations. SECTION 14 TRANSPORT INFORMATION (Not meant to be all inclusive) Domestic Highway (Containers < 1 Quart are ORM-D) Domestic Air Shipments: Varies Proper Shipping Name: Lubricating Preparation Proper Shipping Name: No data Hazard Class/Subsidiary Hazard: No data Hazard Class/Subsidiary Hazard: No data UN/NA No.: No data UN/NA No.: No data Packing Group: No data Packing Group: No data Label Required: No data Label Required: No data SECTION 15 REGULATORY INFORMATION (Not meant to be all inclusive - selected regulations represented) U.S. FEDERAL REGULATIONS: Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No OSHA: Non-hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). SECTION 313: This product does not contain chemicals which are listed and require reporting under SARA Title III Sec. 313 if used over the threshold reporting quantity. This information must be included in all MSDSs that are copied and distributed for this material. STATE REGULATIONS: CALIFORNIA PROPOSITION 65: This product is not known to contain any material listed under California’s Proposition 65. SECTION 16 OTHER INFORMATION MSDS Status: Revised Section(s): 7/30/04 Updated contents in Section II. WARNING! The use of this product is beyond the control of the manufacturer and distributor; therefore, no guarantee, expressed or implied, is made as to the effects of such or the results to be obtained if not used in accordance with directions or established safe practice. The user must assume all responsibility, including injury or damage, resulting from its misuse as such, or in combination with other materials. The manufacturer and distributor warrant only that this product meets the specifications for such product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, PRODUCTIVENESS, OR ANY OTHER MATTER OF THIS PRODUCT. THE MANUFACTURER AND DISTRIBUTOR SHALL BE IN NO WAY RESPONSIBLE FOR THE PROPER USE OF THIS PRODUCT. The sole and exclusive remedy against the manufacturer and distributor for breach of warranty shall be reimbursement of the purchase price of the product in the event that a defective condition of the product shall be found to exist. NO OTHER REMEDY (INCLUDING BUT NOT LIMITED TO INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE. This document was created with Win2PDF available at http://www.win2pdf.com. The unregistered version of Win2PDF is for evaluation or non-commercial use only. This page will not be added after purchasing Win2PDF.